Specifications

Symptom Step Check Item Result Action
•
Paper is at a
stop in the
Vertical
Transport
Section.
1
 When the 2nd Drawer is used 
Check the 2nd Drawer Paper
Take-Up Sensor PC7.
 
1)
2)
Remove the misfed paper.
Select "IC Port Data Check".
3) Is the data of PE2 on PWB-F
(IC2F) " ". (See the 5/8 or 6/8
screen on T-7.)
NO
Check the operation of
the Actuator.
4) Operate the Actuator to block
PC7.
 
5) Return to the "I/O Check" menu
screen and select "IC Port Data
Check" again. Has the data of
PE2 changed from " " to " "?
NO
Change PC7.
2
Check the Vertical Transport
Sensor 2 PC11.
 
1)
2)
Remove the misfed paper.
Select "IC Port Data Check".
3) Is the data of PE1 on PWB-F
(IC2F) " ". (See the 5/8 or 6/8
screen on T-7.)
NO
Check the operation of
the Actuator.
4) Operate the Actuator to block
PC11.
 
5) Return to the "I/O Check" menu
screen and select "IC Port Data
Check" again. Has the data of
PE1 changed from " " to " "?
YES
Change PWB-F or
PWB-A.
NO
Change PC11.
1
 When the 3rd Drawer is used 
Check 3rd Drawer Paper Take-Up
Sensor PC8.
 
1)
2)
Remove the misfed paper.
Select "IC Port Data Check".
3) Is the data of PC2 on PWB-F
(IC2F) " ". (See the 5/8 or 6/8
screen on T-7.)
NO
Check the operation of
the Actuator.
4) Operate the Actuator to block
PC8.
 
5) Return to the "I/O Check" menu
screen and select "IC Port Data
Check" again. Has the data of
PC2 changed from " " to " "?
NO
Change PC8.
H
L
H
H
H
H
L
H L
T-17