Specifications

Symptom Step Check Item Result Action
•
Paper is at a
stop before
the Vertical
Transport
Sensor.
1
 When the 2nd Drawer is used 
Check the operation of Paper
Take-Up Clutch CL2.
 
1)
2)
Remove the misfed paper and
reset the misfeed.
Select "IC Port Data Check".
3) Is the data of BPC5 on PWB-A
(IC4A) "1"?
(See the 2/8 screen on T-7.)
NO
Change PWB-A.
4) By pressing the "Change" key
to change the data from "1" to
"0", does CL2 operate? (Check
that CL2 makes a sound.)
YES
Proceed to Step 2, or
check PC7.
5) By making a "Board Check", is
the malfunction code "C03E"
displayed?
YES Change PWB-A.
NO
Change CL2.
2
Is the Paper Take-Up Guide Plate
dirty or deformed? YES
Clean or change the
Paper Take-Up Guide
Plate.
1
 When the 3rd Drawer is used 
Check the operation of Paper
Take-Up Clutch CL3.
 
1)
2)
Remove the misfed paper and
reset the misfeed.
Select "IC Port Data Check".
3) Is the data of PC2 on PWB-F
(IC1F) "1"? (See the 4/8 or 5/8
screen on T-7.)
NO
Change PWB-F or
PWB-A.
4) By pressing the "Change" key
to change the data from "1" to
"0", does CL3 operate? (Check
that CL3 makes a sound.)
YES
Proceed to Step 2, or
check PC8.
NO
Change CL3.
2
Is the Paper Take-Up Guide Plate
dirty or deformed? YES
Clean or change the
Paper Take-Up Guide
Plate.
T-15