Specifications

<Copier Take-Up Misfeed Clearing Procedure>
Symptom Step Check Item Result Action
•
Paper is not
taken up at all. 1
Does the paper being used meet
product specifications? NO
Instruct the user to use
the paper that meets
product specifications.
•
Paper is at a
stop before
the Vertical
Transport
Sensor.
2
Is the paper curled, wavy or damp?
YES
Change the paper.
Instruct the user on the
storage of paper.
3
Does the Paper (Length/Width)
Guide (of the drawer) position
match the paper used?
NO
Change the Guide
mounting position.
4
Are the Paper Take-Up Roll and
Paper Separator Roll deformed,
worn, or dirty with paper dust?
YES
Clean or change the
Paper Take-Up Roll
and/or Paper Separator
Roll.
5
 When the 1st Drawer is used 
Check the operation of the Paper
Take-Up Clutch CL1.
 
1)
2)
Remove the misfed paper and
reset the misfeed.
Select "IC Port Data Check".
3) Is the data of BPC4 on PWB-A
(IC4A) "1"?
(See the 2/8 screen on T-7)
NO
Change PWB-A.
4) By pressing the "Change" key to
change the data from "1" to "0",
does CL1 operate? (Check that
CL1 makes a sound.)
YES
Proceed to Step 6, or
check PC6.
5) By making a "Board Check", is
the malfunction code "C033D"
displayed?
YES Change PWB-A.
NO
Change CL1.
6
Is the Paper Take-Up Guide Plate
dirty or deformed? YES
Clean or change the
Paper Take-Up Guide
Plate.
T-14