Specifications

➀
4) Make sure that the on-the-screen data of APA2 output port on PWB-A (IC5A) is "1" (CL5:
deenergized).
5) Press the "Change" key on the screen to change the data from "1" to "0" and energize CL5 for
approx. 5 seconds. Check if the clutch makes a sound or not to determine whether it is
"normal" or "faulty".
Normal: CL5 makes a sound.
Faulty: CL5 does not make a sound.
6) If CL5 did not operate, make a "Board Check" in the Tech. Rep. mode. (Some electrical parts
only)
7) The corresponding malfunction code is displayed if PWB-A does not output the CL5
energization signal.
∗: "C0326" is displayed for CL5.
T-6