Specifications

11. Machine Status

•

This mode is used to display up to five codes of isolated malfunctions that have occurred. The

following malfunctions are detected as isolated malfunctions.

Malfunction Code Description

C03 51 to 54

71/74

Control Board, Harness malfunction

C09 XX Paper feed malfunction

C0F 02 Original size detection malfunction

C0F 20, 21, 23 AIDC Sensor malfunction

C0F 79 Paper Empty Sensor malfunction

C0F E1 to FF Original Size Detecting Sensor malfunction

C0b 10 to 13, 30, 51, 60 to 64, 70, 71 Sorter malfunction

C0d XX Duplex Unit malfunction

Note 1: Up to five isolated malfunction codes are displayed. When the sixth isolated malfunction is

detected or when an isolated malfunction is detected at any paper source other than the

Manual Feed Section, the corresponding ordinary malfunction code is displayed and copy is

disabled.

Note 2: The isolated malfunctions corresponding to codes C0bXX (Sorter Trouble) are displayed in

the form of the following pictorial symbols, not in the form of malfunction codes. The

malfunctions corresponding to codes C0b10 to 13, 51 and 70 are treated as isolated

malfunctions when detected during initial operation and as ordinary malfunctions when

detected during a copy cycle.

C0b10 to 13/30/60 to 64 :

C0b51 :

C0b70, 71 :

•

With the Machine Status screen being displayed, swing open/close the Front Door to clear all the

isolated malfunction codes being displayed.

Note: For C0F02/C0FE1 to FF and C0bXX, turn the Power Switch OFF and ON to clear the isolated

malfunction codes.

1134M071AA

1134M072AA

1134M073AA

S-61