Specifications

- 2in1-
Used to adjust the stop position of 2-in-1 documents when the Automatic/Duplexing Document
Feeder is used on the copier.
Setting Description Initial Setting
43 Approx. −7 mm
44 Approx. −6 mm
45 Approx. −5 mm
46 Approx. −4 mm
47 Approx. −3 mm
48 Approx. −2 mm
49 Approx. −1 mm
50 Approx. 0 mm
∗
Setting Description Initial Setting
51 Approx. +1 mm
52 Approx. +2 mm
53 Approx. +3 mm
54 Approx. +4 mm
55 Approx. +5 mm
56 Approx. +6 mm
57 Approx. +7 mm
58 Approx. +8 mm
Note: "43 to 49": Direction in which the document stop position overlaps the Original Scale
"51 to 58": Direction in which the document stop position moves away from the Original Scale
- 2in1 Doc. Spacing -
Used to adjust the spacing of 2-in-1 documents when the Automatic/Duplexing Document Feeder is
used on the copier.
Setting Description Initial Setting
43 Approx. −7 mm
44 Approx. −6 mm
45 Approx. −5 mm
46 Approx. −4 mm
47 Approx. −3 mm
48 Approx. −2 mm
49 Approx. −1 mm
50 Approx. 0 mm
∗
Setting Description Initial Setting
51 Approx. +1 mm
52 Approx. +2 mm
53 Approx. +3 mm
54 Approx. +4 mm
55 Approx. +5 mm
56 Approx. +6 mm
57 Approx. +7 mm
58 Approx. +8 mm
Note: "43 to 49": Direction in which the document spacing decreases
"51 to 58": Direction in which the document spacing increases
<Setting procedure>
1. Using the ▼/▲ key, select the mode to be adjusted.
2. Using the / key, select the desired setting.
▼
▲
S-59