Specifications

● Doc. Stop Position Set
Used to adjust the document stop position in each mode.
- 1-Sided -
Used to adjust the stop position of 1-sided documents when the Automatic/Duplexing Document
Feeder is used on the copier.
Setting Description Initial Setting
43 Approx. −7 mm
44 Approx. −6 mm
45 Approx. −5 mm
46 Approx. −4 mm
47 Approx. −3 mm
48 Approx. −2 mm
49 Approx. −1 mm
50 Approx. 0 mm
∗
Setting Description Initial Setting
51 Approx. +1 mm
52 Approx. +2 mm
53 Approx. +3 mm
54 Approx. +4 mm
55 Approx. +5 mm
56 Approx. +6 mm
57 Approx. +7 mm
58 Approx. +8 mm
Note: "43 to 49": Direction in which the document stop position overlaps the Original Scale
"51 to 58": Direction in which the document stop position moves away from the Original Scale
- 2-Sided -
Used to adjust the stop position of 2-sided documents when the Automatic/Duplexing Document
Feeder is used on the copier.
Setting Description Initial Setting
43 Approx. −7 mm
44 Approx. −6 mm
45 Approx. −5 mm
46 Approx. −4 mm
47 Approx. −3 mm
48 Approx. −2 mm
49 Approx. −1 mm
50 Approx. 0 mm
∗
Setting Description Initial Setting
51 Approx. +1 mm
52 Approx. +2 mm
53 Approx. +3 mm
54 Approx. +4 mm
55 Approx. +5 mm
56 Approx. +6 mm
57 Approx. +7 mm
58 Approx. +8 mm
Note: "43 to 49": Direction in which the document stop position overlaps the Original Scale
"51 to 58": Direction in which the document stop position moves away from the Original Scale
S-58