Specifications

9-2. Settings in the ADF Check/Setting mode

● Paper Passage & Input Check

The results of the Paper Passage Check and Sensor Check of the document path in each mode

are indicated by "1/0".

Sensor

Empty Sensor (PC2)

Exit Sensor (PC8)

Width Sensor A (PC9)

Width Sensor B (PC10)

Width Sensor C (PC11)

Pick-Up Sensor A (PC3)

Pick-Up Sensor B (PC4)

Note: "1" indicates that paper is present and "0" that paper is absent except for the Pick-Up Sensors

A, B where "1" indicates that the Sensor is unblocked and "0" that it is blocked.

1. On the Paper Passage Check screen, select the mode to be checked.

2. Press the "Next" key to access the Input Check screen, load paper onto the Automatic/Duplexing

Document Feeder, and press the Start Key.

3. According to the mode selected, make sure that "1/0" changes in order of the paper passage.

● Output Check

Used to check the operations of the Motors and Solenoids as single parts.

Screen Display Part Name

M1 Pick-Up Motor

M2 Paper Take-Up Motor

M3 Main Drive Motor

Screen Display Part Name

M4 Turnover/Exit Motor

SL1 Scale Solenoid

SL2 Turnover Solenoid

•

Select the part to be checked for operation and press the Start Key.

S-57