Specifications

8. RD Mode
•
Select this mode when the copier is fitted with the DT-103.
1134S052CA
RD Mode
Menu
ID Code
DT Setting
Initial
Transmission
Data Save Call Completion
Data Load Counter Clear
End of normal data trans.
*******
<Setting procedure>
•
With this screen displayed, enter the ID Code from the 10-key pad (seven digits).
8-1. Settings in the RD mode
● DT Setting
When the copier is fitted with the DT-103, make the necessary settings.
1134S053CA
RD Mode
Menu
DT Setting
CT-ID
DT-ID
TEL No.
Next
<Setting procedure>
1. Select CT-ID and enter the center ID from the 10-key pad (four digits).
2. Select DT-ID and enter the data terminal ID from the 10-key pad (six digits).
3. Select TEL No. and enter the telephone number of the Center from the 10-key pad.
Note: When the office extension and outside line use different systems, enter "p" (for a "pulse"
telephone line) or "t" (for a "tone" telephone line) with the Stop Key before entering the
telephone number.
Note: Enter a pause or wait code according to the time required for switching from the extension line
to the outside line, which depends on the type of office system used:
Switching time = less than 3 seconds → Use the Interrupt Key to enter the pause code "—".
Switching time = more than 3 seconds → Use the Energy Saver Key to enter the wait code
"w".
1134S054CA
RD Mode
Menu
DT Setting
Change
Dial Mode
Auto Receive
RAM Clear
Tone
YES
YES
BackUp
S-53