Specifications

- Maintenance Code Display Resetting Procedures -

•

Code: M1

Displayed to indicate that the count of any Maintenance Counter has reached the set count.

1. Select "Count" in the Tech. Rep. mode and access the"Maintenance" screen.

2. Select the count that has reached the set count and press the Clear Key to clear the count.

•

Code: M2

Displayed to indicate that the Toner Collect count of the Consumables Counter has reached the

set count.

1. Select "Count" in the Tech. Rep. mode and access the "Consumables" screen.

2. Select the count of Toner Collect and press the Clear Key to clear the count.

•

Code: M3

Displayed to indicate that Web Roller count of the Consumables Counter has reached the setting.

1. Select "Count" in the Tech. Rep. mode and call up the "Consumable" screen.

2. Select the count for Web Roller and press the clear key to clear the count.

•

Code: M4

Displayed to indicate that the Copy Kit count of the Consumables Counter has reached the set

count.

1. Select "Count" in the Tech. Rep. mode and access the "Consumables" screen.

2. Select the count of Copy Kit and press the Clear Key to clear the count.

● Auto CPU Reset

On detection of an incorrect operation due to noise, etc., the CPU deenergizes and energizes the

Main Relay to prevent the occurrence of a malfunction. "1" or "0" is displayed to indicate whether

an incorrect operation has occurred or not based on the locations of occurrences.

Screen Display Description

MSC/Panel PWB-B (MSC Board)

Master PWB-A (Master Board)

SCP PWB-J (SCP Board)

ADF AFR-9

Sorter S-206/ST-207

Data Controller D-102

Note: "1" indicates the occurrence of a malfunction and "0" no malfunction.

S-44