Specifications

● Consumables

Set the life of the consumables. When the count which increases one per copy cycle reaches the

set count, the Maintenance Call message and a code are displayed.

Note: Code display

Toner Collect: Code "M2", Web Roller: Code "M3" Copy Kit: Code "M4"

Note: Toner Collect should not be set higher than 400 K, Web Roller should not be set higher than

200 K, The Tech. Rep. Call message is displayed when these two respective settings are

reached, Copying is inhibited after 5000 more copies are made.

Note: "Copy Kit" depends on the setting of "Copy Kit Counter" in the Tech. Rep. Choice mode.

Screen Display

Set Count

Toner Collect XXXXXX XXXXXX

Web Roller XXXXXX XXXXXX

Copy Kit XXXXXX XXXXXX

1. Using the ▼/ key, select the counter to be set (1 to 5).

2. Enter the value from the 10-key pad (max. six digits).

Note: To clear the counter, select the count to be cleared using the ▼/ key, and press the Clear

Key. If the count has been cleared accidentally, press the Interrupt Key to return the counter

to the count it had before clearing.

•

Using the ▼/▲ key, select the count to be cleared and press the Clear Key.

Note: If the count has been cleared accidentally, press the Interrupt Key to return the counter to the

count it had before clearing.

▲

S-43