Specifications

● Port/Option
Counts the frequency of use per port/option as reference data to be used by the Tech. Rep. in
maintenance.
<Port/Option 1/3>
Screen Display Description
Manual Feed
Number of sheets fed
from the Manual Feed
Section
1st Drawer
Number of sheets fed
from the 1st Drawer
2nd Drawer
Number of sheets fed
from the 2nd Drawer
3rd Drawer
Number of sheets fed
from the 3rd Drawer
4th Drawer Not counted
5th Drawer Not counted
<Port/Option 2/3>
Screen Display Description
LCT
Number of sheets fed
from the Large Capacity
Cassette on C-302
ADF
Number of sheets that
passed the ADF Entry
ADF Rev.
Number of sheets that
passed the ADF
Turnover section
Dup
Number of paper
take-up cycles in the
Duplex Unit
Sorter
Number of sheets that
passed through the
Sorter
Stapler
Number of stapling
cycles
<Port/Option 3/3>
Screen Display Description
Puncher
Number of punching
cycles
PC Drum
Value converted from
the number of PC Drum
revolutions into the
number of A4 crosswise
sheets fed
Starter Number of sheets fed
Fusing Roller
Value converted from
the number of Fusing
Roller revolutions into
the number of A4
crosswise sheets fed
Note: The counts of the PC Drum, Fusing Roller
are displayed on 1000 sheet basis.
<Clearing procedure>
•
Using the ▼/▲ key, select the count to be cleared and press the Clear Key.
Note: If the count has been cleared accidentally, press the Interrupt Key to return the counter to the
count it had before clearing.
S-42