Specifications

▲

● Maintenance

Set the next maintenance time based on copy cycle count. The count is increased by 1 per copy

cycle. When the count reaches the setting, the Maintenance Call message and inspection code

"M1" are displayed together.

Note: The Maintenance Call message is displayed or not displayed depending on the setting of

"Maintenance Call" in the Tech. Rep. Choice mode.

Note: If the Maintenance Call message is displayed, the copy cycle can be continued and copy is

not disabled.

Screen Display

Set Count

Counter 1 XXXXXX XXXXXX

Counter 2 XXXXXX XXXXXX

Counter 3 XXXXXX XXXXXX

Counter 4 XXXXXX XXXXXX

Counter 5 XXXXXX XXXXXX

1. Using the ▼/ Skey, select the counter to be set (1 to 5).

2. Enter the value from the 10-key pad (max. six digits).

Note: To clear the counter, select the count to be cleared using the ▼/ key, and press the Clear

Key. If the count has been cleared accidentally, press the Interrupt Key to return the counter

to the count it had before clearing.

▲

S-41