Specifications

6-1. Overview of the Malfunction Bypass Function
•
When a malfunction occurs in the copier, the malfunction bypass function
permits the copier to continue operating if that malfunction is any of the
predefined candidates for isolated malfunctions and if it will not affect the
current copying operations.
•
If a copying function involving the isolated malfunction is selected, the
message "Selected mode can’t be used." appears on the Touch Panel and
the copier rejects that function.
•
A dot mark " " appears at the location on the Touch Panel shown below
when the malfunction bypass function is activated. The isolated
malfunctions which have so far occurred can be viewed (malfunction codes
are shown; graphic symbols are shown for the Sorter-related malfunctions)
by selecting the "Machine status" function on the Tech. Rep. mode menu
screen. (For details, see SWITCHES ON PWBs.)
6
MALFUNCTION BYPASS FUNCTION
•
Up to five isolated malfunctions are shown. When a sixth isolated
malfunction occurs, the copier considers it as a normal malfunction,
prompting a Tech. Rep. call. (The sixth malfunction is shown on the Touch
Panel.)
1075M158CA
Auxiliary
Finishing
Orig. Copy
Exposure PaperZoom
Ready to copy.
Auto Expo. x1.000 Auto Paper
1
Basics
Dot mark
M-14