Specifications

● Marketing Area
Used to change the paper size/fixed zoom ratio according to the marketing area.
Screen Display Factory Setting
MJ
MH Europe Area
Screen Display Factory Setting
MC U.S.A Area
Others Area
Note: When the marketing area has been changed, the copier must be momory cleared.
● Plug-In Counter
Used to disable or enable the copier depending on whether or not a Plug-In Counter or Magnetic
Card is used when the copier is equipped with a Plug-In Counter or D-102.
Screen Display Description Initial Setting
ON
The copier is disabled when the Plug-In
Counter or Magnetic Card is removed.
OFF
The copier remains enabled even when
the Plug-In Counter or Magnetic Card is
removed.
∗
Note: "ON" should be selected when the copier is equipped with a Plug-In Counter or D-102.
● CH Wire Cleaning
Used to clean the Drum and Transfer charge wires to prevent uneven charging or malfunction
due to contamination. This function is, or is not, performed when the Power switch is turned ON
depending on the following choice.
Screen Display Description Initial Setting
ON Cleaning
∗
OFF No Cleaning
● Telephone # Input
Used to register the telephone number of the Tech. Rep. so that the telephone number registered
is displayed when a malfunction occurs or a Maintenance Call is displayed.
<Setting procedure>
•
Press the Clear Key and register the telephone number using the 10-key pad (up to 19 digits).
Note: Use the Interrupt Key to register "—".
S-34