Specifications

● Sorter Trouble
Used to select "Enable Copy" or "Disable Copy" when a malfunction of the paper exit option is
detected.
Screen Display Description Initial Setting
Enable Copy
Copy is enabled after detection of a
malfunction.
∗
Disable Copy
Copy is disabled after detection of a
malfunction.
Note: If a malfunction has already been detected when "Enable Copy" is selected, a warning is
displayed only when the malfunctioning Mode detected is selected, and the Mode selected is
not accepted.
● Leading Edge Erase
Used to select "Yes" or "No" for the Leading Edge Erase function.
Note: When "Yes" is selected, the erase width is approx. 3 mm.
Screen Display Initial Setting
Yes
∗
No
● Trailing Edge Erase
Used to select "Yes" or "No" for the Trailing Edge Erase function.
Screen Display Initial Setting
Yes
∗
No
Note: When "Yes" is selected, the erase width is approx. 3 mm.
● Loop Adjust (Drawer)
Used to adjust the loop length (before the Synchronizing Roller) of the paper fed from any of the
1st to 3rd Drawers.
Code Loop Length Initial Setting
47 Approx. 4 mm
48 Approx. 6 mm
49 Approx. 8 mm
50 Approx. 10 mm
∗
Code Loop Length Initial Setting
51 Approx. 12 mm
52 Approx. 14 mm
53 Approx. 16 mm
S-31