Specifications

2. User Help

When the user sends a User Help code according to the status of the copier fitted with the DT-103,

this function transmits that status to the center.

•

Enter a 3-digit value from the 10-key pad (max. six codes).

Note: To transmit the User Help code, enter the value and press "Data Send" on the User Mode

screen.

3. Max. Copy Sets

Used to turn "ON" or "OFF" the maximum number setting of copy cycles.

Select "ON" to limit the number of copy cycles that can be performed in a single copy operation.

Description Initial Setting

1-99

OFF

∗

•

To set the maximum number of copy cycles, enter the required value (1 to 99) from the 10-key

pad (without pressing any key on the screen). When it is not desired to set the maximum number,

select "OFF" on the screen.

S-22