Specifications

2-2. Explanation of the Touch Panel
•
The screen shown on the Touch Panel is classified into the four types: the
Basic, Warning, User Mode, and Tech. Rep. Mode screens.
•
Following is the detailed explanation of what is shown on the Basic and
Warning screens.
(1) Basic Screen
•
The Basic screen is the initial screen that appears when the power is
turned ON, the control panel is reset, or auto clear function is activated.
Auxiliary Finishing Orig. Copy
Exposure PaperZoom
Ready to copy.
Auto Expo. x1.000 Auto Paper
1134P429CA
1
Basics
Staple
£
1 2 3
4
5
7
6
8
1
Auxiliary Key
•
When the Auxiliary key is touched, the Auxiliary functions menu
screen appears, allowing the operator to select either Cover, Page
Insertion, OHP Interleaving, Book Copy, File Margin, or Edge/Frame
Erase.
•
The functions "Cover" and "Page Insertion" appear only if the copier
is equipped with an AFR-9.
2
Finishing Key
•
When the Finishing key is touched, a screen appears that allows the
operator to select the finishing type, either Non-Sort, Sort,
Sort-and-Staple, Group, Hole Punch, or Manual Staple.
•
The functions other than Non-Sort appear only when the copier is
equipped with a Sorter or Staple Sorter.
3
Orig. Copy Key
•
When the Orig. Copy key is touched, a screen appears that allows
the operator to set the original copy type.
4
Message Display
•
Shows the current copier status, operating instructions or caution,
and other data including the number of copies selected.
▲
▲
▲
S-4