Specifications

123
456
789
0C
1134P476DA
Auxiliary
Ready to Copy
1
Auto Exp.
Exposure
Auto Paper
Paper
x1.000
Zoom
Finishing Orig. Copy
Basic
User Mode
Job Recall
Mode Check
1 2 3
4
5
6
7
8 9 101112
1134P476DA
2
Touch Panel
• A large liquid-crystal display is
used for greater ease of operation.
3
10-Key Pad
• Sets the number of copies to be
made, zoom ratio, paper size,
access number, and other
numeric data including that for the
Tech. Rep. mode.
4
Access Mode Key
• Enables and disables a copy cycle
if "Copy Track" has been turned
ON of User’s Choice.
5
Energy Saver Key
• Sets the copier into the Energy
Saver mode, turning OFF all
control panel indicators except the
Start Key and Energy Saver Key.
6
Interrupt Key
• Interrupts a current job with a
different one or restores the copier
to the previous job.
7
Panel Reset Key
• Sets the copier into the initial
mode, clearing all settings made
previously on the control panel.
8
Clear Key
• Clears the number of copies,
zoom ratio, and other data
including the counter reading.
• Ejects an original fed previously
onto the Original Glass by the
Duplexing Document Feeder.
9
Stop Key
• Stops a multi-copy cycle and a
Test mode operation.
• Used also in combination with
other keys to enter the Adjust
mode. (With the Tech. Rep. Mode
screen on the Touch Panel, press
the Stop Key and then the Start
Key, in that order.)
10
Start Key
• Starts a multi-copy cycle and a
Test mode operation.
• Used also in combination with
other keys to enter the Adjust
mode. (With the Tech. Rep. Mode
screen on the Touch Panel, press
the Stop Key and then the Start
Key, in that order.)
11
Job Recall Key
• Selects the Job Recall screen, on
which the user can recall or check
a copying-job program previously
stored in memory.
12
Mode Check Key
• Selects the Mode Check screen
• From this screen, the user can
access the setting screen of a
particular function and change or
cancel the setting as necessary.
S-3