Specifications

1. Remove the PC Drum.
2. Remove the Cleaning Unit.
3. Turn over the Cleaning Unit, remove four screws,
unplug one connector, and remove the PC Drum
Paper Separator Fingers Assy.
1075D092AA
4. Remove two screws and PC Drum Paper Separator
Fingers mounting bracket.
1075D089AA
3. Remove one screw and the Main Erase Lamp.
1. Remove the PC Drum.
2. Using a brush or soft cloth, clean the Pre-Cleaning
Erase Lamp, Toner Antispill Seal, AIDC Sensor, and
PC Drum Paper Separator Fingers.
(9) Cleaning of the Pre-Cleaning Erase Lamp, Toner Antispill Seal, AIDC
Sensor, and PC Drum Paper Separator Fingers
(10) Disassembly of the PC Drum Paper Separator Fingers Assy
D-43