Specifications

4. Wipe clean the 4th and 5th Mirrors with a soft cloth.
1. Open the Front Lower Door, slide out the PC Unit and
release and swing up the Upper Half of the copier.
2. Wipe clean the 6th Mirror and Image Erase Lamp with
a soft cloth.
(8) Cleaning of the 6th Mirror and Image Erase Lamp
1. Remove the Left Upper Cover.
2. Remove four rubber stoppers and replace the Cooling
Fan Filter.
(9) Replacement of the Cooling Fan Filter
1. Remove the Original Glass and Optical Cover.
2. Remove two screws to free the Original Size
Detecting Sensors mounting bracket.
(10) Removal of the Lens Drive Cable
3. Remove one spring, two E-rings, and the Lens Cover.
After the Lens and 4th and 5th Mirrors have been
cleaned, make the "adjustment of exposure level in
the Auto Exposure mode." (See p. D-90.)
NOTE
After the 6th Mirror has been cleaned, make the
"adjustment of exposure level in the Auto Exposure
mode." (See p. D-90.)
NOTE
D-32