Specifications

(11) Removal of the 3rd Drawer
1. Press the Paper Descent Key and slide out the 3rd
Drawer.
∗
If pressing the Paper Descent Key does not allow you to
slide out the 3rd Drawer, insert a screwdriver or similar
object through the hole in the Rear Lower Cover and
unlock the drawer.
2. Remove four screws on the Slide Rails and pull the
3rd Drawer out to the front.
3. Unplug one connector, loosen two thumbscrews to
remove the Connector Board Assy, and remove the
3rd Drawer.
1. Remove the 3rd Drawer.
2. Remove four screws, unplug one connector, and
remove the Cover Assy.
3. Remove two screws and the inner cover.
4. Remove two screws and the drive cover.
(12) Removal of the 3rd Drawer Wires
Use care not to let the 3rd Drawer come off the Slide
Rails.
NOTE
D-25