Specifications

(8) Disassembly of the Synchronizing Rollers Unit
1. Remove the Synchronizing Rollers Unit.
2. Unhook one spring. Remove the Misfeed Removal
Guide Plate by turning it 90° and then lifting it.
3. Remove the pressure springs at the front and rear, Upper Transport Roller, and Upper
Synchronizing Roller.
Different types of pressure springs are used for the Transport Roller and Synchronizing Roller.
That for the Transport Roller is thinner than that for the Synchronizing Roller. Do not confuse
them at reinstallation.
NOTE
4. Remove four screws, unplug one connector, and remove the Pre-Synchronizing Rollers Guide
Plate.
5. Remove five screws, unplug one connector, and remove the Pre-Transport Rollers Guide Plate.
D-19