Specifications

1075D017AA
1. Remove the Right Rear Cover and Rear Lower Cover.
2. Unplug the connectors from DC Power Supply Board
PWB-C and Drawer S/P Board PWB-F and remove
the harness from the wiring saddle.
3. Remove four screws and the mounting brackets for
PWB-C and PWB-F.
4. Remove the Toner Collecting Bottle. Remove two
screws and the metal plate.
5. Remove four screws and unplug one connector to free
the Vertical Transport Motor Assy.
6. Remove five screws. Slightly raising the Paper
Take-Up Drive Assy, remove it together with the
Vertical Transport Motor Assy.
1075D020AA
7. Unplug two connectors, remove two screws and the
Lift-Up Motor Assy.
(6) Removal of the Lift-Up Motor (Metric areas only)
8. Remove the C-clip and the Lift-Up Motor.
D-17