Specifications

Symbol Name Removal Procedure
PU4
Pre-Image Transfer Lamp
Power Supply
Open the Front Lower Door. → Slide out the PC Unit.
→ Remove the Cleaning Unit. → Remove PU4.
PU5 Exposure Lamp Regulator
Remove the Rear Upper Cover. → Remove the Upper
Rear Cover. → Remove the PWB-J. → Remove the
PU5 Cover. → Remove PU5.
HV1 PC Drum Charge HV
Remove the Rear Upper Cover. → Remove the Upper
Rear Cover. → Remove PWB-J. → Remove the HV1
mounting bracket. → Remove HV1.
HV2
Image Transfer/Paper
Separator HV
Remove the Rear Lower Cover. → Remove HV2.
D-11