Specifications

No. Part Name Removal Procedure
1 Front Lower Door
Open the Front Lower Door. → Remove 2 belt mounting
screws. → Remove 4 Front Lower Door mounting screws.
2 Front Upper Door
Open the Front Upper Door. → Remove 1 belt mounting
screw. → Remove 4 Front Upper Door mounting screws.
3 Control Panel Unit See p. D-8.
4 Upper Right Cover
Loosen the center upper mounting screw on the Right
Upper Cover. → Pull the Upper Right Cover up.
5Right Upper Cover
Open the Front Upper Door. ⇒ Swing up the Multi
Bypass Table. → Remove 4 Right Upper Cover
mounting screws.
6 Right Rear Cover Remove 2 Right Rear Cover mounting screws.
7
Right Door (Multi Bypass
Unit)
Remove the Right Rear Cover. ⇒ Remove the harness
from one wiring saddle. ⇒ Unplug 3 connectors. →
Remove 1 ground wire mounting screw. ⇒ Open the
Right Door and pull it up.
8Right Lower Cover
Open the Right Door. → Remove 2 Right Lower Cover
mounting screws.
9 Right Front Cover
Open the Front Lower Door. → Remove 3 Right Front
Cover mounting screws.
10 Front Right Cover
Slide out all paper drawers. → Remove 4 Front Right
Cover mounting screws.
11 3rd Drawer See p. D-25.
12 2nd Drawer
Remove the Front Right Cover. ⇒ Remove the Drawer
Stopper. ⇒ Slide out the 2nd Drawer and, raising it
slightly up, pull it out.
13 1st Drawer
Remove the Front Right Cover. ⇒ Remove the Drawer
Stopper. ⇒ Slide out the 1st Drawer and, raising it
slightly up, pull it out.
14 Front Left Cover Slide out all paper drawers. ⇒ Open the Left Door. →
Remove 2 Left Front Cover mounting screws. →
Remove 3 Front Left Cover mounting screws. (The Front
Left Cover and Left Front Cover are secured by means of
metal plates.)
22 Left Front Cover
D-7