Specifications

<Operation in Time Saver Mode: A4 crosswise paper, 10 copies>
The trailing edge of the 6th copy moves past Duplex Unit Paper Entry
Sensor PC38 (
H
).
Approx. 470 msec.
The Front/Rear Edge Guide Plates move to the set paper size position
to align the copy.
At the same time, Duplex Unit Paper Finger Solenoid SL3 is energized
and the Duplex Unit Paper Finger presses the copies stored in the
Duplex Unit.
The trailing edge of the 7th copy moves past PC38 (
H
).
(Each of the 7th and subsequent copies is taken up and fed back into
the copier each time it has just been stored.)
Approx. 470 msec.
The Front/Rear Edge Guide Plates move to the set paper size position
to align the copy.
Duplex paper take-up sequence starts.
Duplex Unit Leading Edge Solenoid SL5 is energized.
Duplex Unit Pick-Up Solenoid SL4 is energized.
Approx. 200 msec.
260 msec. after the leading edge of the copy has blocked Duplex Unit
Paper Take-Up Sensor PC40 (
L
), SL4 and Duplex Paper Take-Up
Clutch CL6 are deenergized and the Front/Rear Edge Guide Plates
move to the standby position.
Have all copies been taken up for Time Saver?
After all copies for Time Saver have been taken up and fed in, the
copies previously stored in the Duplex Unit are taken up and fed in,
one by one.
When all copies have been taken up from the Duplex Unit, the Duplex
Unit Paper Finger turns to the home position.
Duplex Unit Paper Empty Sensor PC41, which has been in the blocked
(
L
) state, is unblocked (
H
).
M10 is energized and the Front/Rear Edge Guide Plates return to their
home positions.
YES
NO
M-199