Specifications

◆
Time Saver Mode
•
In the Time Saver mode, the copies stored in the Duplex Unit are taken up
and fed back into the copier in a different order from when in the normal
mode. When the number of copies remaining to be stored in the Duplex
Unit becomes N, that copy is immediately taken up and fed back to the
copier and the subsequent ones are taken up each time they have just
been stored in the Duplex Unit.
•
This mode is set only when the Duplexing Document Feeder is being used
[in the standard mode (not in the Mixed Original Detection mode) with
full-size zoom ratio, and using 297-mm-long-or-less paper].
•
When Duplex Unit Paper Finger Solenoid SL3 is energized, it turns the
Duplex Unit Paper Finger so that the finger presses the copy or copies
stored in the Duplex Unit.
•
When all copies are fed out of the Duplex Unit, the Paper Finger returns to
its home position.
No. Paper Length Time Saver Mode
1 139 mm to 216 mm
The number of copies remaining to
be stored in the Duplex Unit is 4
2 217 mm to 297 mm
The number of copies remaining to
be stored in the Duplex Unit is 3
Duplex Unit Paper Finger
Duplex Unit Paper
Finger Solenoid SL3
M-198