Specifications

24-8. Duplex Paper Take-Up Operation
◆
Normal mode (Making 2 2-sided copies on A4 crosswise paper from
1-sided originals by using the Duplexing Document Feeder)
1075T126CA
Start Key ON
Duplex Paper Take-Up Start
Align/Retract Align Return to Home
1st Copy 2nd Copy
200
msec.
200
msec.
260msec.
Duplex Unit Paper
Take-Up Sensor (PC40)
H
L
Fusing Motor (M6)
ON
OFF
ON
OFF
Vertical Transport
Motor (M2)
Paper Take-Up
Motor (M1)
ON
OFF
ON
OFF
Duplex Unit Front/Rear Edge
Guide Drive Motor (M10)
Duplex Unit Leading Edge
Solenoid (SL5)
ON
OFF
ON
OFF
Duplex Unit Pick-Up
Solenoid (SL4)
ON
OFF
Duplex Unit Paper
Take-Up Clutch (CL6)
260msec.
◆
Paper Take-Up Retry Control
•
If Duplex Unit Paper Take-Up Sensor PC40 is not activated (blocked)
within a given period of time after the start of the Duplex paper take-up
sequence, the paper take-up sequence starts again after SL4 and SL5 are
deenergized. This reduces the occurrence of paper misfeed.
<Paper Take-Up Retry>
CL6 is energized approx. 200 msec.
after SL4 and SL5 have been energized.
If the leading edge of the copy does not block PC40 within
approx. 1,100 msec. after SL4 and SL5 have been energized,
the paper take-up retry sequence starts.
SL4 and SL5 are deenergized.
500 msec.
CL6 is energized approx. 200 msec. after SL4 and SL5
have been energized again. (Paper take-up retry operation)
NOTE: The paper take-up retry sequence is not performed in the Time Saver
mode.
M-197