Specifications

24-6. Storing of Copies in Duplex Unit
•
The 1-sided copy is stored into the Copy Storage of the Duplex Unit as
detailed below during the 2-sided copy mode.
<For A4 crosswise paper>
Select the 2-sided copy mode.
Press the Start Key.
An M7 Remote signal is output from pin 31 of IC1G
(to turn M7 forward).
M9 pulse signals are output from pins 56 to 62 of IC1G
(to turn M9 forward and backward).
M10 pulse signals are output from pins 35 to 38 of IC1G
(to turn M10 forward).
M7 : Energized
M9 : Energized
M10: Energized
The Trailing Gate Unit moves to the position corresponding to the set
paper size.
The Front/Rear Edge Guide Plates move to the retracted positions
appropriate for the set paper size.
M9, M10: Deenergized
The 1-sided copy is fed into the Duplex Unit.
The trailing edge of the 1-sided copy moves past PC38 (
H
).
Approx. 470 msec.
M10 pulse signals are output from pins 35 to 38 of IC1G (to turn
M10 forward).
M10: Energized
The Front/Rear Edge Guide Plates move to the predetermined paper
size position and align the copy.
Is the 1-sided copy just stored the last one?
M10: Deenergized
The copy storing sequence is completed when the Front/Rear Edge
Guide Plates complete aligning the copy.
PWB-G
Duplex Unit S/P Board
NO
YES
M-193