Specifications

◆
Operation of the Front/Rear Edge Guide Plates (for A4 lengthwise
paper)
<In standby, at home position>
•
The Front/Rear Edge Guide Plates are located at a position where
Duplex Unit Front/Rear Edge Guide Plate Home Position Sensor PC42
is blocked.
M10PC42
307 mm
Front Edge Guide Plate
Rear Edge Guide Plate
1075M033AA
<When storing and taking up a copy>
•
Select the 2-sided copy mode and press the Start Key. At the same
time, M10 starts turning forward and the two guide plates move to the
respective retracted positions.
A4 lengthwise (210 mm) + Retract Distance (5 mm × 2)
5 mm
5 mm
Approx. T msec. after the trailing edge of the paper to be stored in the
Duplex Unit has unblocked (
H
) Duplex Unit Paper Entry Sensor PC38,
M10 starts turning forward moving the Front/Rear Edge Guide Plates to
the paper aligning positions, the dimension between which is the width of
the paper. The two guide plates align the paper.
T: 470 msec. for A4 lengthwise (297 mm)
85 msec. for a length longer than A4 lengthwise
The guide plates move between the retracted and aligning positions for
each copy to be stored.
A4 lengthwise (210 mm)
1075M035AA
Press the Start Key.
When Duplex Unit Paper Empty Sensor PC41 is unblocked (
H
), M10
starts turning backward to return the Front/Rear Edge Guide Plates to a
position where PC42 is blocked (
L
).
M-192