Specifications

4) When the trailing edge of the paper

moves past the tip of the Turnover

Roll C Release Lever, the release

lever returns to its original position.

The paper is then moved up by

Turnover Roll C and the Slip

Roller. When Duplex Unit Turnover

Switching Solenoid SL11 is

energized, the Paddle Roller of the

Turnover/Paddle Roller starts

turning and the paddles feed the

paper into the Duplex Unit.

Duplex Unit Turnover Path Sensor PC39

Duplex Unit

1075M029AB

◆

Turnover/Paddle Roller Mechanism/Control

•

The Turnover Roller of the Turnover/Paddle Roller turns whenever

Duplex Unit Drive Motor M7 remains energized (as indicated by

below). The Paddle Roller of the Turnover/Paddle Roller, on the other

hand, turns one complete turn (as indicated by below) when the

stoppers are disengaged, which occurs when Duplex Unit Turnover

Switching Solenoid SL11 is energized. These sequences of operation

are performed for each copy, thereby feeding the copy into the Duplex

Unit.

Stopper

Turnover Roller

Paddle Roller

SL11

M-184