Specifications

21-3. Drive for the Fusing Unit
•
The Fusing Unit is driven by Fusing Motor M6 fitted to the Fusing Drive Unit
in the rear of the copier. (M6 is fitted to the copier frame, not to the Fusing
Unit.)
*The illustration shows the unit viewed from the rear of the copier.
Upper Fusing Roller
Lower Fusing Roller
Clutch Spring
Fusing Motor M6
Paper Exit Roller
Upper Fusing Roller Drive Gear
1075M009AB
The gears enclosed by are on the copier frame.
M-167