Specifications

<Paper Pressure Release Mechanism> (Except 3rd Drawer)
•
If the drawer is pulled out when a sheet of paper is pinched between the
Feed and Separator Rolls, that sheet of paper is left inside the copier and it
becomes difficult to remove it.
•
This copier is therefore provided with a mechanism that releases the
Separator Roll from the Feed Roll when the drawer is slid out of the copier.
•
The paper pressure release mechanism consists of the Pressure Release
Spacer on the Separator Roll Assy and the Pressure Release Rail fitted to
the upper part of the Drawer Rail. When the drawer is slid out, the Pressure
Release Rail presses down the Pressure Release Spacer, which results in
the Separator Roll being disengaged from the Feed Roll.
Feed Roll
Pressure Release Rail
Pressure
Release Spacer
Separator
Roll Assy
Gap: Approx.
2 mm
M-122