Specifications

•
The Main Tray is Lowered When:
(1) 3rd Drawer Paper Empty Sensor PC24 is unblocked (
H
) during a
paper take-up sequence.
(2) 3rd Drawer Paper Descent Key UN12 is pressed.
(3) Power Switch S1 is turned ON when the Main Tray is located at a
position other than its upper and lower limits.
◆ Main Tray Stop Conditions
•
While the Main Tray is going up:
(1) 3rd Drawer Lift-Up Sensor PC16 is blocked (
L
).
(2) PC16 is blocked (
L
) during top level correction.
•
While the Main Tray is going down:
(1) 3rd Drawer Tray Lower Position Sensor PC46 is blocked (
L
).
◆
Timing Chart
3rd Drawer Set
Sensor (PC61)
ON ( Forward)
1075T112CB
H
1 sec.
L
H
L
OFF
3rd Drawer Elevator
Motor (M27)
3rd Drawer Lift-Up
Sensor (PC16)
0.5 sec.
ON
H
L
OFF
ON (Backward)
OFF
Ascent
Descent
3rd Drawer Paper
Descent Key (UN12)
3rd Drawer Elevator
Motor (M27)
3rd Drawer Tray Lower
Position Sensor (PC46)
ON
OFF
3rd Drawer Paper
Descent Key (UN12)
(Inch Area)
M-112