Specifications

15-8. 3rd Drawer Paper Empty Detection
Main Tray
•
A paper-empty condition of the Main Tray is detected by 3rd Drawer Main
Tray Paper Empty Board PWB-E and 3rd Drawer Paper Empty Sensor
PC24.
•
PWB-E detects a paper-empty condition at a timing when the 3rd Drawer is
slid into the copier (i.e., when the Main Tray is at its lower limit position).
The copier notes a paper-empty condition if PWB-E is unblocked (
H
).
•
PC24 works when paper is taken up from the Main Tray (i.e., when the
Main Tray is at its upper limit position). The copier considers that the Main
Tray has run out of paper if PC24 is unblocked (
H
).
Shift Tray
•
A paper-empty condition of the Shift Tray is detected by 3rd Drawer Shift
Tray Paper Empty Sensor PC60.
•
The copier considers that the Shift Tray has run out of paper when PC60 is
unblocked (
H
).
<Copying Operation at Main/Shift Tray Paper Empty>
*
When a paper-empty condition is detected in the Main Tray during a multi
copy cycle, the paper stack on the Shift Tray, if available, is transferred to
the Main Tray to continue the copy cycle. If paper is not loaded on the Shift
Tray but paper of the same size and direction is loaded in any other paper
source, that paper source is automatically selected for an uninterrupted
copy cycle.
*
When a paper-empty condition is detected in both the Main and Shift Tray
during a multi copy cycle, and if no paper of the same size and direction is
available, a paper-empty message is given on the Touch Panel and the
copy cycle is terminated.
3rd Drawer Paper Empty Sensor PC24
3rd Drawer Main
Tray Paper Empty
Board PWB-E
3rd Drawer Shift Tray Paper
Empty Sensor PC60
4425M120AA
M-108