Specifications

13-12. Developing Unit Dehumidifying Heater
•
Variations in the environmental conditions (temperature and humidity)
surrounding the copier could result in toner and carrier being insufficiently
charged. Then, the amount of toner attracted onto the surface of the PC
Drum decreases, making copy image density unstable. Developing Unit
Dehumidifying Heater H6 installed on the underside of the Developing Unit
ensures that toner and carrier mixed together in the Developing Unit are
sufficiently charged under changing environmental conditions around the
Developing Unit.
•
H6 is turned ON only when the following two conditions are met:
1. The power cord is plugged in.
2. Power Switch S1 is in the OFF position.
M6
1075C11MAA
M-91