Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-11
[User Mode]
4-3. User Mode Setting Details
Function No.
Setting (The default is .)
U-0
✽
For 23 cpm
Copier only
<Mixed Original Detection>
Select whether to turn ON the Mixed Original Detection function or not
(high-speed processing).
ON: The copier enables its Auto Paper Selection (APS) or Auto Size
Selection (AMS) function for all originals loaded in the ADF (i.e.,
it can make copies from originals of assorted sizes loaded in a
set).
OFF: The copier enables its APS/AMS function only for the first
original loaded in the ADF.
U-4
✽✽
For 18/23 cpm
Copier only
<Lightweight Original>
Select whether to turn ON the Lightweight Original function or not
when the ADF is used.
U-6
✽
For 23 cpm
Copier only
<Smaller Originals>
Select whether to enable (“ON”) a copy cycle or not (“OFF”) when it is
initiated by pressing the Start key with an original of the smallest
detectable size (metric areas: A5 or smaller; inch areas: Letter or
smaller) placed on the Original Glass.
NOTE
The default setting is OFF for the metric areas and ON for the inch
areas.
Highlighted
Data 0
Description
Mixed Original Detection
function ON
Mixed Original Detection
function OFF (high-speed
processing)
1
Data 1
Description
Normal
The original is pressed
against the Original Width
Scale when stopped.
Lightweight Original
The original is not
pressed against the Origi-
nal Width Scale when
stopped.
0
ON OFF
The copy cycle is run using the
paper loaded in the default paper
source.
A warning message is given and
the copier inhibits the start of this
copy cycle.