Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-4
For more details, see the “Operator’s Manual” shipped with the copier.
2-2. 18 cpm Copier
1. 10-Keys
Numeric keypad used for setting the num-
ber of copies to be made, and Tech.
Rep. mode settings.
2. Clear Key
Clear the number-of-copies setting,
choice modes setting.
3. Energy Saver Key
Sets the copier into the Energy Saver
mode.
4. Panel Reset Key
Resets the copier to the initial mode.
5. Stop Key
Stops a multi-copy cycle or a test (F
)
operation.
6. Start Key
Starts a multi-copy cycle or a test (F
)
operation.
7. Zoom Ratio Select Key
Selects a fixed zoom ratio.
8. Zoom Up/Down Keys
Changes the zoom ratio manually.
9. Auto Exposure Mode Key
Selects either the Auto or Manual Expo-
sure, or Photo mode.
10. Exposure Control Keys
Selects the exposure level.
11. Paper Select Key
Selects the paper source.
12. Book Key
Selects the Book mode.
13. Finishing Mode Select Key
Selects the Sort mode.
14. Auto Size Key
Selects the Auto Size mode.
15. Drum Dehumidify Key
Runs a Drum Dehumidify cycle.
16. Auxiliary Toner Replenishing Key
Starts an auxiliary toner replenishing
sequence.
17. Meter Count Key
Gives a display of the current copy count.