Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-50
✽
1 23 cpm copier only
Control Panel Indication
Different indications are given on the control panel (Zoom Ratio Indicator, etc.) between
15,18 and 23 cpm copier. For details, see Service Mode in Switches on PWBs.
3-2. ADJUSTMENT REQUIREMENTS LIST
Adjustment Item Requirements Adjusting Point
Ref.
Page
Max. Exposure Lamp
Voltage
100 to 127V areas: 81 ± 1 V
200 to 240V areas: 162 ± 2 V
Control panel
D-52
Optimum Exposure
Setting in the Manual
Exposure Mode
Kodak Gray Scale:
no image of the 1st step,
faint image of the 2nd step
Control panel
D-55
Optimum Exposure
Setting in the Auto
Exposure Mode
Control panel
D-56
Multi Bypass Table
Reference Position
(100 %) 20 ± 2 mm Multi Bypass Table
D-59
1st Drawer Reference
Position
✽
1
(100 %) 20 ± 2 mm Drawer Front Panel
D-60
2nd Drawer Reference
Position
(100 %) 20 ± 2 mm Drawer Front Panel
D-60
Full Size Leading Edge
Registration
(100 %) 20 ± 1.5 mm Control panel
D-62
Enlargement Leading
Edge Registration
(200 %) 40 ± 3 mm Control panel
D-64
Reduction Leading
Edge Registration
(50 %) 10 ± 1.5 mm Control panel
D-65
Image Leading Edge
Erase Width
0.5 to 6.5 mm
(100%) 1.0~6.5mm
(200%) 0.5 ~11mm
(50%) 0.5~6.5mm
Control panel
D-66
Image Erase Lamp
Position
1 ± 0.5 mm Adjusting Screw for
Image Erase Lamp
position
D-68
Adjustment of the
Original Size Detecting
Board
Control panel
D-71