Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-16
5. Remove four screws and the Multi Bypass Table.
6. Unplug the Multi Bypass Table connector.
1139D240AA
7. Remove one screw and the Multi Bypass Table.
1139D225AA
8. Unplug one connector.
9. Remove the Tension Unit.
1151D018AA
10. Remove two screws and the Clutch Mounting
Bracket.
1139D101AA
1139D102AA
11. Remove two screws and the Lower Guide.