Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-14
Remark
•
The replacement springs are installed on the underside of the 2nd Drawer.
(6) Replacement of the Paper Lifting Springs (2nd Drawer): 23 cpm copier only
1139U044AA
1. Remove the Stoppers of the 2nd Drawer and the
2nd Drawer.
1136P243AA
2. Remove one screw and the Edge Guide Unit.
1151D043AA
3. Remove the Front Separator Finger by removing its
pin.
1139U045AA
4. Raise the Paper Lifting Plate Unit and replace the
Paper Lifting Springs. See p. D-61.
1139U047AA