Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 DIS/REASSEMBLY, ADJUSTMENT
98.04.13
D-7
✽
1: Multi Bypass Section: 15/18 cpm copier option
✽
2: 18/23 cpm copier only
No. Part Name Removal Procedure
21 Upper Left Cover Swing down No.1.
→
Release and swing up the Upper Half of
the copier.
→
Remove four screws that secure the Upper Left
Cover.
22 Middle Front Left
Cover
Swing down No.1.
→
Release and swing up the Upper Half of
the copier.
→
Remove one screw that secures the Middle
Front Left Cover.
23 Front Exit Cover Swing down No.1.
→
Release and swing up the Upper Half of
the copier.
→
Remove No.22.
→
Remove one screw that
secures the Front Exit Cover.
24 Rear Exit Cover Swing down No.1.
→
Release and swing up the Upper Half of
the copier.
→
Remove No.26.
→
Remove one screw that
secures the Rear Exit Cover.
25 Lower Left Cover Remove four screws that secure the Lower Left Cover.
26 Middle Rear Left
Cover
Swing down No.1.
→
Release and swing up the Upper Half of
the copier.
→
Remove one screw that secures the Middle Rear
Left Cover.