Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 TROUBLESHOOTING
98.05.15
T- 1 1
When a paper misfeed occurs in the copier, the corresponding Misfeed Location Monitor
LED on the control panel blinks to let the user know where the misfeed has occurred. If an
LED lights up steadily, it indicates that there might be a sheet of paper present at that par-
ticular location in the copier. If a paper misfeed occurs very frequently, carry out the neces-
sary troubleshooting procedures according to the location of the misfeed.
✽
When option is installed
3 PAPER TRANSPORT FAILURE
3-1. Paper Misfeed
Blinking
LED
Misfeed Location Ref. Page
➁
Copier take-up and vertical transport T-15~T-17
➂
Paper Feed Cabinet take-up and vertical trans-
port
T-18~T-21
✽
➀
Bypass port T-22, T-23
➄
Transport/Separator T-24, T-25
➅
Fusing/Exit T-26, T-27
✽
➆ ➈
Duplex Unit vertical transport T-28~T-30
✽
➇
Duplex Unit storage T-28~T-30
✽
➂
Duplex Unit take-up T-31, T-32
✽
➉
Sorter/Staple Sorter —
✽
➃
Automatic/Duplexing Document Feeder —
Blinking
Light
There is a misfeed at
that location.
Steady
Light
There might be a
sheet of paper
stopped at that loca-
tion.
1139T025AA