Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-33
[Service Mode Adjust Mode]
Adjust Mode Setting
A5 Reduction
registration
adjustment
Corrects registration between the leading edge of the original and
that of the image in a reduction mode by varying the Synchroniz-
ing Roller start timing.
A6 Book-B scan
registration
adjustment
Corrects the registration between the leading edge of the original
and that of the image in Book-B scan by varying the Synchroniz-
ing Roller start timing.
A11 Enlargement
registration
adjustment
Corrects registration between the leading edge of the original and
that of the image in an enlargement mode by varying the Syn-
chronizing Roller start timing.
A12 Leading edge
erase width
adjustment
Corrects the leading edge erase width by varying the Image
Erase Lamp ON timing.
A13 Trailing edge
erase width
adjustment
Corrects the trailing edge erase width by varying the Image Erase
Lamp ON timing.
Data 30....50....70
Description
−
5.6 mm
(Smaller
deviation)
.... ±0 mm .... +5.6 mm
(Greater
deviation)
Data 30....50....70
Description
−
5.6 mm
(Smaller
deviation)
.... ±0 mm .... +5.6 mm
(Greater
deviation)
Data 30....50....70
Description
−
5.6 mm
(Smaller
deviation)
.... ±0 mm .... +5.6 mm
(Greater
deviation)
Data 42....50....58
Description
−
7.5 mm
(Smaller
width)
.... ±0 mm .... +7.5 mm
(Greater
width)
Data 40....50....60
Description
−
7.5 mm
(Smaller
width)
.... ±0 mm .... +7.5 mm
(Greater
width)