Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-29
•
This function shows the number of copy processes to which different parts or supplies
have been subjected (count-up type). Each count is given as shown below.
Example
IU Counter
Count: 1234567
<Setting Procedure>
1. Select the Parts/Supplies Life Counter function.
2. Each press of the Paper Select key shows the count of a new counter in the following
order.
<Clearing a Count>
•
Show the count of the counter to be cleared and press the Clear key. If a count is mistak-
enly cleared, press the Stop key to undo the clearing command.
NOTE
The IU Counter cannot be cleared under this function. However, the counts of all counters
except the Fusing Unit Counter under this counter function are cleared when the starter
charging sequence is completed.
(8) Parts/Supplies Life Counter
Order Zoom Ratio Indicator Description
1
2
3
4
5
IU
Pc
St
Cb
Fu
IU Counter
PC Drum Counter
Developer Counter
Cleaning Blade Counter
Fusing Unit Counter
Zoom Ratio
Indicator
IU
345
Multi-Copy
Display
12
67
Shown alternately