Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-28
•
This function shows the number of malfunctions that have occurred at different locations
in the copier (count-up type counter). The Zoom Ratio Indicator shows the malfunction
code, while the Multi-Copy Display shows the count.
<Setting Procedure>
1. Select the Malfunction Counter function.
2. Each press of the Paper Select key shows the count of a new counter in the following
order.
NOTE
The count is given only if it is not “0.” If all counts are “0,” the message “All 0” is shown.
✽
For 18 cpm Copier, the counter counts are shown in the order of 1 to 11, 18, 19, 25 and
29 to 33.
15 cpm Copier, the counter counts are shown in the order of 1 to 11, 18, 19 and 29 to 31.
<Clearing a Count>
•
Show the count of the counter to be cleared and press the Clear key. If a count is mistak-
enly cleared, press the Stop key to undo the clearing command.
(7) Malfunction Counter
Example
ATDC Sensor malfunction (F30)
Count: 12
Zoom Ratio Indicator
F30
Multi-Copy Display
12
Order Malfunction Code Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
000
010
04C
070
400
500
510
520
600
610
620
900
950
990
998
99E
F02
F10
F30
F79
FE1
b10
b30
b50
b60
d00
d20
d50
E1
E2
Ar1
Ar2
Ar3
A Main Drive Motor malfunction
A PC Drive Moter malfunction
A Cooling Fan Motor malfunction
A Toner Replenishing Motor malfunction
An Exposure Lamp malfunction
An abnormally low fusing temperature during warm-up
An abnormally low fusing temperature after completion of warm-up
An abnormally high fusing temperature
A Scanner drive system malfunction
A Lens drive system malfunction
A Mirror drive system malfunction
A 1st Drawer malfunction
A 2nd Drawer malfunction
A Paper Feed Cabinet Main Tray malfunction
A Paper Feed Cabinet Shift Tray malfunction
A Paper Feed Cabinet
An Original Size Detecting Unit malfunction
An AE Sensor malfunction
An ATDC Sensor malfunction
A Paper Empty Sensor malfunction
An Original Size Detecting Sensor malfunction
A Sorter Paper Clamp Unit moving malfunction
A Sorter Paper Aligning Motor malfunction
A Sorter Staple Unit malfunction
A Sorter Bin moving mechanism malfunction
A Duplex Unit Guide Plates malfunction
A Duplex Unit entrance port switching failure
A Duplex Drive Motor malfunction
A starter charging failure
An ATDC automatic adjustment/IU fuse blowing failure
Copier watchdog
ADF watchdog
Sorter watchdog