Service manual

FrameMaker Ver.5.5(PC) EP1054/EP1085/EP2030 SWITCHES ON PWBs/TECH. REP. SETTINGS
98.06.09
S-25
•
This function allows the Tech. Rep. to change the fixed zoom ratios over the range
between ×0.500 and ×2.000 according to the needs of the user.
<Setting Procedure>
1. Select the Altering Fixed Zoom Ratios function.
2. Select the particular fixed zoom ratio to be changed and press the Clear key to clear it.
NOTE
If the zoom ratio is cleared mistakenly, press the Panel Reset key to undo the clearing oper-
ation.
3. Enter the desired zoom ratio from the 10-Keys.
4. Press the Start key to validate the new zoom ratio.
•
This function shows the counts of the PM Counter (IU) and Ports/Options Counter. The
particular port or option is indicated by the corresponding LED of the Misfeed Monitor.
The count is shown across the “Zoom Ratio Indicator” and “Multi-Copy Display.”
NOTE
The PM Counter is indicated by the IU Service Life Indicator LED.
Counting System
•
PM Counter: Count-down type (When the counter has counted down to zero, a
−
(minus)
sign appears in the Zoom Ratio Indicator and the count is thereafter incremented.
•
Ports/Options Counter: Count-up type
<Setting Procedure>
1. Select the PM Counter and Ports/Options Counter function.
2. Each press of the Paper Select key lights up a new LED representing the new counter
in the following order.
[23 cpm Copier]
NOTE
PF-112, if the copier is so equipped, is indicated by the 3rd Drawer LED only.
(3) Altering Fixed Zoom Ratios (For 23 cpm Copier Only)
(4) PM Counter and Ports/Options Counter
Example) Count: 12345
Multi-Copy Display
123
Zoom Ratio Indicator
45
Order Description Order Description
1
2
3
4
5
PM Counter
1st Drawer
2nd Drawer
3rd Drawer (Paper Feed Cabinet)
4th Drawer (Paper Feed Cabinet)
6
7
8
9
10
Manual bypass
Duplex take-up
Sorter
Stapling
ADF
[18 cpm Copier] [15 cpm Copier]
Order Description Order Description
1
2
3
4
5
PM Counter
Copier paper source
Manual bypass
Sorter
ADF
1
2
3
PM Counter
Copier paper source
Manual bypass