i EP1080 Thank you for purchasing the Minolta EP1080. This operator’s manual explains how to operate the copier and replenish supplies. It also gives some troubleshooting tips as well as general precautions to be observed when using the copier. To ensure the best performance and effective use of your EP1080, read this manual carefully until you familiarize yourself thoroughly with its operation and features. After you have read through the manual, keep it for ready reference.
ii Contents Chapters 1 through 3 give the basic information for making copies. Be sure to read these chapters before attempting to use your copier. Using This Manual Organization viii Page Organization ix Terms and Symbols for the Type of Originals and Copy Paper x Chapter 1 Safety Notes 1. Installing the Copier Installation Site 2 Power Source 2 Grounding 2 Space Requirements 3 2.
iii Contents Chapter 2 First Things to Know about EP1080 1. System Overview 8 2. Copier Parts and Accessories Outside Your Copier EP1080 10 Inside Your Copier EP1080 12 Paper Feed Cabinet PF-201 14 Duplex Cabinet PF-201 and Duplex Unit AD-3 15 Duplexing Document Feeder AFR-7 16 Automatic Document Feeder AF-3 17 Staple Sorter ST-101 and 10-Bin Sorter S-104 18 Multi Bypass Table MB-1 19 3. Control Panel Keys and Indicators Basic Panel 20 System Panel 22 Display Panel I 24 Display Panel II 26 4.
iv Contents Chapter 3 Making Copies 1. Basic Copying Overview 36 2. Basic Job Setting Original Placement 38 Using Automatic/Duplexing Document Feeder (AF-3/AFR-7) 40 Image Density 46 Zoom Ratio • Types of Zoom Ratio 48 • Auto Size Mode 51 • Zoom Ratio Table (Orignal Size to Paper Size) 53 Paper Size • Manual Mode 54 • Auto Paper Mode 56 Number of Copies 58 Copy Cycle Start 59 Interrupt Mode 60 Manual Bypass Copying 62 3. System Copying Overview 64 Typical Job Setting Procedures 66 4.
v Contents Chapter 4 Special Function 89 1. Checking The Total Number Of Copies Mode 90 2. Auxiliary Toner Replenishing Mode (Increasing the Image Density) 92 3. Drum Dehumidify Function 93 4. User’s Choice 94 Chapter 5 When an Indicator Lights Up (Replenishing Supplies, Clearing Misfeed, and Correcting a Closure Failure) 1. Quick Reference for Indicator Lights 108 2. Detailed Instruction for Indicator Lights Add Toner Indicator 110 Add Paper Indicator 112 Add Staple Indicator 116 I. U.
vi Contents Chapter 6 Troubleshooting 151 1. When This Type of Copy is Produced The Image is too light 152 The Image is too dark 152 The Copy is blurry 152 The Copy has lines 154 The Copy has dark specks or spots 154 The Edge of the Copy is dirty 154 The Image on the Copy is not aligned properly 154 2.
vii Contents Chapter 8 Miscellaneous 171 1. Care of the Copier Chapter 1 Safety Notes Daily Checks 172 Cleaning 174 2. Function Combination Matrix 178 3. Description of Paper Size 180 4. Zoom Ratio Table (Original Size to Paper Size) 181 5.
viii Using This Manual Organization Chapters 1 through 3 give the basic information for making copies. Be sure to read these Chapters before attempting to use your copier. Chapter 1 Safety Notes About the operating environments, conditions, and precautions for use. Chapter 2 First Things to Know About EP1080 A brief description of the system and preliminary information about the different parts of the system. Chapter 3 Making Copies (Basic Copying) About how to make basic and system copies.
ix Using This Manual Page Organization Each page of this manual is basically organized as follows. Index: Used to locate your Chapter quickly. Section title 1076O298 Table of contents of the chapter: Gives a table of contents of the Chapter which you can use to quickly locate your page. ➭ p. XX (Cross-reference): Shows the page to refer to for more detailed information. Control Panel Indicators A steady Light or blinking Light Indicator on the control panel is represented as follows.
x Using This Manual Terms and Symbols for the Type of Originals and Copy Paper Certain conventions have been adopted and corresponding graphic symbols used in the manual to designate the various types of originals and copy paper. These two pages explain about these conventions. Copy Feeding Direction In this copier system, the copy paper is taken up from the right-hand side of the copier and fed through the copier toward the left-hand side, out face up onto the Copy Tray.
xi Using This Manual "Width" and "Length" When we talk about the size of the original or copy, we call side A "width" and side B "length." A: Width B: Length 1139O1610A Terms and Symbols Used When the original or copy has a "length" longer than its "width," we call it "lengthwise" and use symbol "L" or " ." 1139O1610A When the original or copy has a "length" shorter than its "width," we call it "crosswise" and use symbol "C" or " .
xii
Chapter 1 Safety Notes Safety Notes Chapter 1 1 This Chapter explains about the operating environments, conditions, and precautions for use. 1. Installing the Copier Installation Site 2 Power Source 2 Grounding 2 Space Requirements 3 2.
2 Safety Notes Chapter 1 1. Installing the Copier Installation Site To ensure utmost safety and prevent possible malfunctions of the copier, install it in a location which meets the following requirements. ◆ A place away from a curtain or other things that catch fire and burn easily. ◆ An area where there is no possibility that it might be splashed with water or other liquid. ◆ An area free from direct sunlight. ◆ A place out of the direct air stream of an air conditioner, heater, or ventilator.
3 Space Requirements 1,189 mm 2,104 mm 150 mm 300 mm 200 mm 852 mm 609 mm 1139O1730A 1139O1720A 2,109 mm 1,242 mm 150 mm 200 mm 1,401 mm 300 mm Safety Notes To ensure easy copier operation, supply replacement, and service maintenance, adhere to the recommended space requirements detailed below. * Be sure to allow a clearance of 150 mm. or more at the back of the copier as there is a ventilation duct. 1139O1742A Chapter 1 1.
4 Safety Notes Chapter 1 2. Precautions for Use Operating Environment The operating environmental requirements of the copier are as follows. Temperature Humidity : 10°C to 30°C (50°F to 86°F) with a fluctuation of 10°C (50°F) per hour : 15% to 85% with a fluctuation of 20% per hour Using the Copier Properly To ensure the optimum performance of the copier, follow the precautions listed below. ◆ NEVER place a heavy object on the copier or subject the copier to shocks.
5 Use the following precautions when handling the copier supplies (toner, paper, etc.). ◆ Store the paper, toner, and other supplies in a place free from direct sunlight and away from any heating apparatus. Keep them in a dry, clean environment. ◆ Store paper, which has been removed from its wrapper but not loaded into the Drawer, in a sealed plastic bag in a cool, dark place. ◆ Use the correct toner for the exclusive use by the EP1080 copier.
6
7 This Chapter gives you a brief description of the system preliminary information about the different parts of the system. 1. System Overview 8 2. Copier Parts and Accessories Outside Your Copier 10 Inside Your Copier 12 Paper Feed Cabinet 14 Duplex Cabinet and Duplex Unit 15 Duplexing Document Feeder 16 Automatic Document Feeder 17 Staple Sorter and 10-Bin Sorter 18 Multi Bypass Table 19 3. Control Panel Keys and Indicators Basic Panel 20 System Panel 22 Display Panel I 24 Display Panel II 26 4.
8 1. System Overview The EP1080 system can be configured with the following components. First Things to Know about EP1080 Chapter 2 ◆ Automatic Document Feeder AF-3
9 1. System Overview AFR-7
10 2. Copier Parts and Accessories Outside Your Copier EP1080 2 First Things to Know about EP1080 Chapter 2 1 3 4 5 1139O1000A 6 1 Control Panel 2 Original Cover 3 Power Switch 4 5 Manual Bypass : Use for manual feeding of paper into the copier. Table ➭ p. 62 Right Door : Open to clear a paper misfeed. ➭ p. 136 6 Total Counter : Use to start a copy cycle or make various copying-job settings. ➭ p. 20 : Holds the original placed on the Original Glass in position.
11 2. Copier Parts and Accessories 9 10 11 1139O1010A 7 Copy Tray : Holds copies fed out of the copier. 8 Front Door 9 1st Drawer : Open for the following purposes: • Replacing the Toner Cartridge. • Clearing a paper misfeed. • Cleaning the Corona Units. Closing the Front Door after a misfeed has been cleared will turn OFF the Misfeed Indicator on the control panel. ➭ pp. 26, 132 : Holds up to 250 sheets of paper.
12 2. Copier Parts and Accessories First Things to Know about EP1080 Chapter 2 Inside Your Copier EP1080 2 1 3 7 6 5 4 1139O1020A 1 2 3 4 5 6 7 Original : Place your original along these Scales for correct Width/Length Scale positioning. ➭ p. 38 Original Pad : Holds the original in position on the Original Glass. ➭ p. 174 Original Glass : Place your original face down on this Glass. ➭ p.
13 2. Copier Parts and Accessories 9 13 10 11 12 1139O1030A 8 9 10 11 12 13 Upper Half of Copier : The copier main body can be divided into two parts, the upper and lower, the Upper Half being swung upward when so operated. ➭ p. 134 Imaging Unit : Converts the original image to the copy image. ➭ p. 120 Imaging Unit Lock : Operate when replacing the Imaging Unit. ➭ p. 120 Release Lever Dehumidifier : Turn ON to prevent condensation from forming on Switch the PC Drum wnen power is turned OFF.
14 2. Copier Parts and Accessories First Things to Know about EP1080 Chapter 2 Paper Feed Cabinet PF-201 3 1 2 1139O1041A 1 3rd Drawer : Holds up to 500 sheets of paper. ➭ p. 115 2 4th Drawer : Holds up to 500 sheets of paper. ➭ p. 115 3 Lower Right Door : Open when clearing a paper misfeed. ➭ p.
15 2. Copier Parts and Accessories Duplex Cabinet PF-1D and Duplex Unit AD-3 2 5 3 1139O1252A 4 1 Left Door : Open when clearing a paper misfeed. ➭ p. 142 2 : Open when clearing a paper misfeed. ➭ p. 143 3 Misfeed Removal Guide Plate Duplex Unit 4 Storage Drawer 5 Lower Left Door : Turns over 1-sided copies for the making of 2-sided copies. : Holds copy paper, toner, and other supplies. (PF-1D only) : Open when clearing a paper misfeed. ➭ p.
16 2. Copier Parts and Accessories Duplexing Document Feeder AFR-7 2 1 First Things to Know about EP1080 Chapter 2 3 F1 F3 4 F2 F4 6 5 1139O1060A 1 2 3 4 5 6 Document Exit Tray Document Feed Tray Document Guide Plates Document Transport Belt Lock Release Lever : Receives originals that are automatically ejected from AFR-7. : Load the originals face up on this tray. ➭ p. 41 Document Exit Tray Extender : Pull out when making copies on larger paper. ➭ p.
17 2. Copier Parts and Accessories Automatic Document Feeder AF-3 2 1 4 6 5 8 7 1139O1070A 1 2 3 4 5 6 7 8 Document Exit Tray Document Feed Tray Document Guide Plates Document Release Key Document Feed Unit Guide Plate Document Transport Belt Lock Release Lever : Receives originals that are automatically ejected from AF-3. : Load the originals face up on this tray. ➭ p. 41 Document Exit Tray Extender : Pull out when making copies on larger paper. ➭ p.
18 2. Copier Parts and Accessories Staple Sorter ST-101 and 10-Bin Sorter S-104 Chapter 2 2 First Things to Know about EP1080 1 3 1139O1080A 4 Sort Bins 2 : Hold sorted or grouped copies, the Top Bin is capable of holding up to 50 copies and each of the 2nd to 10th Bins up to 25 copies, a total of 275 copies. ➭ p. 76 Lock Release Lever : Press to unlock the Sorter. ➭ p. 116 3 Staple Cover 4 Staple Cartridge Release Lever 1 : Open to replace the Staple Cartridge. (ST-101 only) ➭ p.
19 2. Copier Parts and Accessories 1 3 2 1139O1090A 1 2 3 Paper Guide Plate : Slide as necessary to the size of the copy paper. ➭ p. 63 Multi Bypass Table : Load your paper on this Table. It allows you to make copies continuously using paper fed from this Table. The Table is also used in conjunction with the Cover Mode. ➭ p. 87 Multi Bypass Tray : Slide this Extender out when using large-size copy Extender paper. ➭ p.
20 3. Control Panel Keys and Indicators Basic Panel Meter Count Auto Size Manual Staple Mixed Orig. Det. Chapter 2 50%~200% Toner Margin Sort Sort & Staple Drum Dehumidify First Things to Know about EP1080 1 2 3 4 5 6 7 8 9 10 1 1 2in1 Auto 1 2 2in1 2 1 Auto Book 2 2 1 Lighter 2 Book Job Memory Darker A 2 Orig. A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FL A3 A4 A5 Copy 3 4 5 Clip Tray: Use this tray to put the paper clips used with your documents.
21 3. Control Panel Keys and Indicators 7 6 8 9 1 2 3 4 5 6 7 8 9 0 C Auto Lighter Darker A S Auto A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch Full Size Interrupt Start Stop Panel Reset Paper 1139O5472A 19 18 17 11 Interrupt Key: 12 13 14 15 16 17 18 19 16 15 14 13 12 11 10 Press once to interrupt a current job with a more urgent one. Press a second time to return to the previous job. ➭ p.
22 3. Control Panel Keys and Indicators System Panel Meter Count 2 Auto Size Manual Staple Mixed Orig. Det. 3 13 Chapter 2 First Things to Know about EP1080 1 Margin Toner Sort 1 2 Sort & Staple 2 1 Group 2 2 12 1 1 2in1 1 2 2in1 Cover Drum Dehumidify 11 Job Memory Input Book 1 Book 2 4 10 Finishing Orig. Copy 1139O2372A 9 1 2 3 4 5 6 8 7 6 1139O2372A 5 Auto Size Mode : Press as necessary to select the Auto Size Mode. Key ➭ p.
23 3. Control Panel Keys and Indicators Chapter 2 File Margin Mode Key Cover Mode Key First Things to Know about EP1080 : Press to set the copier into the File Margin Mode. ➭ p. 85 : Press to set the copier into the Cover Mode. 8 ➭ p. 87 9 Job Memory Select : Press to call up a copying job program previously Key stored in the program memory. ➭ p. 88 10 Job Memory Input : Press to store a copying job program in the program Key memory. ➭ p.
24 3. Control Panel Keys and Indicators Display Panel I Chapter 2 1 50%~200% Auto First Things to Know about EP1080 Auto Lighter Darker A A4 A3 B4 S Auto A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch 1139O4572A 2 1 Zoom Ratio Indicator / Multi-Copy Display Zoom Ratio Indicator 3 : Each shows the following data. Multi-Copy Display • Zoom ratio Ex.: 100% • Number of copies set to be made Ex.: 10 (copies) • Number of copy sets (Sort and Sort-and-Staple Mode) Ex.
25 3. Control Panel Keys and Indicators Zoom Information Display • Auto Size Mode Indicator 1139O4612A • Fixed Ratio Indicator A4 A3 B4 A3 Full Size B4 A4 A3 A4 1139O4622A Shows which copy size is now being produced from which original size. No indicator LEDs light up when a zoom ratio other than the standard is being used. Ex.: Shows that 70% reduction is being Ex.: selected for use.
26 3. Control Panel Keys and Indicators Display Panel II 2 Chapter 2 1 50%~200% Auto First Things to Know about EP1080 Auto Lighter Darker A A4 A3 B4 S Auto A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch 1139O4662A 3 1 Monitor Display • Paper Port Indicator Shows the Drawer which is currently selected for use. ➭ p. 55 It also lights up when a 1-sided copy is stored in the Duplex Unit. ➭ p. 73 Ex.: Shows that the 1st Drawer is currently Ex.: selected for use.
27 3. Control Panel Keys and Indicators Indicator Indicates that the copier has developed a malfunction. When a malfunction occurs, the corresponding malfunction code is shown across the Zoom Ratio Indicator and Multi-Copy Display. ➭ pp. 109, 149 1139O3250A 1139O3250A Warning Information Display • Wait Indicator Indicates that the copier is warming up. No copy cycle can be initiated as long as this Indicator stays lit. Wait until it goes out. ➭ pp.
28 4. Turning On and Off, and Resetting the Copier Turning ON and OFF First Things to Know about EP1080 Chapter 2 Turning Copier ON ..... Press the Power Switch to the " " position. 1139O1100A Turning Copier OFF ..... Press the Power Switch to the " " position.
29 4. Turning On and Off, and Resetting the Copier When Copier is Turned ON 50%~200% Auto Lighter Darker A 1 2 3 4 5 6 7 8 9 0 C Auto A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch Full Size Start Stop Paper 1139O4702A 1139O4702A Lit Up Orange. About 1 min. In about 1 min., the Wait Indicator goes out and the Start Key turns to green. Now, the copier is ready to make copies.
30 4. Turning On and Off, and Resetting the Copier Auto Copy Start Function (Only when Automatic/Duplexing Document Feeder AF-3/AFR-7 is used) Chapter 2 The Auto Copy Start Function allows a copy process to be started as soon as the copier completes warming up. Using the Function 1 2 3 4 5 6 8 9 First Things to Know about EP1080 7 Auto A3 B4 A4 B5 A4 FLS.
31 4. Turning On and Off, and Resetting the Copier Minimizing the Warm-up Time • To set the copier into the Energy Saving Mode, press the Energy Saving Key on the control panel. Energy Saving ◆ Then, all control panel Indicators 1139O4522A go out, except that the Start Key remains lit up green.
32 4. Turning On and Off, and Resetting the Copier Initial Mode and Panel Resetting Chapter 2 Initial Mode When the Power Switch is turned ON, the initial settings are indicated on the control panel. * The initial settings serve as the reference for all control panel settings to be later made. Auto Sizu Meter Count Manual Staple Mixed Oring.
33 4. Turning On and Off, and Resetting the Copier Panel Resetting Pressing the Panel Reset Key resets all control panel settings including the number of copies to be made and zoom ratio, initializing the mode. 1139O4782A 1139O4782A Useful Tip The Panel Reset Key enables you to cancel all previous settings efficiently. To avoid miscopy, try to press the Panel Reset Key before attempting to make any setting for your own job.
34
Chapter 3 35 Making Copies Making Copies 1. Basic Copying Overview 36 2. Basic Job Setting Original Placement 38 Using Automatic/Duplexing Document Feeder 40 Image Density 46 Zoom Ratio • Types of Zoom Ratio 48 • Auto Size Mode 51 • Zoom Ratio Table (Orignal Size to Paper Size) 53 Paper Size • Manual Mode 54 • Auto Paper Mode 56 Number of Copies 58 Copy Cycle Start 59 Interrupt Mode 60 Manual Bypass Copying 62 3. System Copying Overview 64 Typical Job Setting Procedures 66 4.
36 1. Basic Copying Overview 1 Place Your Original • Raise the Original Cover and place your original face down on the Original Glass. ➭ p. 38 2 Set the Image Density of Copies 3 • Select the Auto Exposure • Select the Auto Size Mode. Mode. ➭ p. 47 ➭ p. 51 Auto Size Auto Lighter Select the Zoom Ratio Darker 1139O2662A A 1139O2662A Making Copies Chapter 3 1139O2002 * You will find the Auto 1139O0200A Size Mode Key on the system panel.
37 1. Basic Copying Overview Select the Paper Size 5 Set the Number of Copies • Using the Multi-Copy • Select the Auto Paper Mode. ➭ p. 56 • Press the Start Key to start Auto B4 A4 B5 A4 FLS. A5 Inch Paper 2 3 5 6 8 9 0 C the copy cycle. ➭ p. 59 Chapter 3 Keys, set the number of copies to be made or the number of copy sets/stacks. ➭ p. 58 A3 Start the Copy Cycle 6 1139O0072A 1139O0072A • Select the desired paper size. ➭ p. 54 A3 B4 A4 B5 A4 FLS.
38 2. Basic Job Setting Original Placement Sheet Originals (of a Standard Size) 1 Raise the Original Cover. Place your original face down on the Original Glass and align its rear left corner with the marker on the Original Width Scale on the left side of the platen. ▼ Making Copies Chapter 3 Place your original face down on the Original Glass.
39 2. Basic Job Setting Book Original *"Book original" refers to an open bound original. Position the higher-numbered page on the Original Width Scale end. NOTES Making Copies 1134O037AA positioned properly for a job type involving "Book" original, you will end up having copies with pages in the wrong order. • Do not place an original weighing more than 3kg on the Original Glass, as an image problem could result.
40 2. Basic Job Setting Using Automatic/Duplexing Document Feeder AF-3/AFR-7 Automatic/Duplexing Document Feeder AF-3/AFR-7 automatically feed in sheet originals placed on the Document Feed Tray one by one for the making of copies. After the copy cycle has been completed, it automatically ejects the finished original onto the Document Exit Tray. Some originals may be suitable for use in the AF-3/AFR-7, while others may not be. Here is a guideline.
41 2. Basic Job Setting Loading the Standard Originals Place a neat stack of originals face up on the Document Feed Tray and then slide the Document Guide Plates to the size of the originals. NOTES AFR-7 • The maximum number of originals that can be loaded is 50 (A4 or smaller). * The capacity is 30 for A3 or B4 origianls. AF-3 • The maximum number of originals that can be loaded is 30 (A4 or smaller). * The capacity is 15 for A3 or B4 origianls.
42 2. Basic Job Setting Loading Originals of Assorted Sizes (Using the Mixed Original Detection Mode) Auto Size Meter Count Margin Toner Drum Dehumidify Input Manual Staple You may load originals having different widths and lengths in the AF-3/AFR-7 and make copies automatically (Auto Paper, Auto Size) as necessary according to the size of each original. Mixed Orig. Det. Sort 1 2 Sort & Staple 2 1 Group 2 2 1 1 2in1 1 2 2in1 Cover Job Memory Finishing Orig.
43 2. Basic Job Setting 3 Swing the Document Exit Tray back again and pull out the Document Exit Tray Extender. 4 Press the Mixed Original Detection Mode Key. Sort Sort & Mixed Orig. Det. 1 2 This completes the setting procedure. Now, make your copies by following the steps given in "BASIC COPYING OVERVIEW" on p. 36. 1 1 2in1 1 1139O2632A NOTE The Sort-and-Staple or Manual Staple Mode cannot be used in the Mixed Original Detection Mode.
44 2. Basic Job Setting NOTES • The AF-3/AFR-7 does not automatically eject the original placed on the Making Copies Chapter 3 Original Glass. If you have two or more originals to make copies from, repeat these procedures as many times as you place each new original directly on the Original Glass. • Be sure to raise the AF-3/AFR-7 to an angle more than 15° before placing the original on the Original Glass.
45 Making Copies Chapter 3 2.
46 2. Basic Job Setting Image Density 1 2 3 4 5 6 7 8 9 0 C Energy Saving 50%~200% Auto Auto Lighter Darker A A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch Chapter 3 Full Size Making Copies S Auto A4 Interrupt Start Stop Panel Reset Paper 1139O1032A 1139O1032A The image density level of copies can be adjusted either in the Auto or Manual Exposure Mode. Select the appropriate mode according to your particular needs.
47 2. Basic Job Setting Selecting the Exposure Mode Auto Exposure Mode Darker A 1139O2072A 1139O2072A Manual Exposure Mode Auto Lighter 1 Press the Exposure Control Key < or > to light up the Exposure Level Indicator. 2 Hold down the Exposure Control Key < or > until the desired exposure level is reached. Darker A 1139O2082A Auto Lighter Darker Press or hold down the Exposure Control Key > .
48 2. Basic Job Setting Zoom Ratio 1 2 3 4 5 6 7 8 9 0 C Energy Saving 50%~200% Auto Auto Lighter Darker A S Auto A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch Full Size Interrupt Start Stop Panel Reset Paper 1139O1032A Making Copies Chapter 3 1139O1032A The zoom ratio may be set manually by the operator when in the Manual Mode or automatically by the copier when in the Auto Size Mode. Select the appropriate mode according to your needs.
49 2. Basic Job Setting Selecting the Fixed Zoom Ratio Press the Reduction, Full Size, or Enlargement Key to set a fixed zoom ratio of your choice. Full Size A4 A3 B4 A3 Each time the Reduction Key is pressed, it selects a new reduction ratio. Full Size B4 A4 A3 A4 Chapter 3 1139O2652A * The Zoom Ratio Indicator shows "50%" when so selected. 1139O0132A 1139O0132A A4 A3 B4 A3 Each time the Enlargement Key is pressed, it selects a new enlargement ratio.
50 2. Basic Job Setting Setting a Zoom Ratio < > < Hold down the Zoom Down or Up Key until the desired zoom ratio is reached. Zoom Down Key: Making the Zoom Down Key: ratio smaller Zoom Up Key: Making the ratio Zoom Up Key: greater > 50%~200% Making Copies Chapter 3 1139O3640A 1139O3640A Zoom range: 50% to 200% Useful Tip To save time and effort, first select the fixed ratio nearest the target zoom ratio before using the Zoom Up or Down Key.
51 2. Basic Job Setting Auto Size Mode • The Auto Size Mode can be selected only when the copier is equipped with AF-3 or AFR-7. • In the Auto Size Mode, the copier automatically selects the correct zoom ratio according to the original size and paper size selected for use. Selecting the Mode Auto Size Press the Auto Size Mode Key. Chapter 3 1 1139O2662A The Zoom Ratio Indicator shows and the Auto Size Mode Indicator Auto lights up.
52 2. Basic Job Setting NOTES • The Auto Size Mode Indicator blinks under any of the following conditions: ◆A good magnification ratio is below 50% or over 200% in the Auto Size Mode. When this happens, cancel the Auto Size Mode and use the Manual Mode. Auto A4 A3 B4 A3 Full Size B4 A4 A3 A4 Making Copies Chapter 3 1139O8022A • The copier has been factory-set to select the Auto Paper Mode in the initial mode.
53 2. Basic Job Setting Zoom Ratio 70% 50% 86% 61% 70% 50% 86% 61% 141% 122% 70% 86% 141% 200% 173% 122% 200% 141% 173% 122% 81% 57% 70% 50% 115% 81% 57% 70% 164% 115% 141% 81% 164% 115% 200% 141% Original Size Paper Size 11" × 17" 11" × 14" Legal 279.4 × 431.8 mm Foolscap Letter Invoice 11" × 15" 11" × 14" 279.4 × 381 mm Legal Foolscap Letter Invoice 11" × 14" Legal 279.4 × 355.6 Foolscap mm Letter Invoice Legal Foolscap 8-1/2" × 14" Letter 215.9 × 355.
54 2. Basic Job Setting Paper Size 1 2 3 4 5 6 7 8 9 0 C Energy Saving 50%~200% Auto Auto Lighter Darker A S Auto A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch Full Size Interrupt Start Stop Panel Reset Paper 1139O1032A The paper size may be selected manually by the operator when in the Manual Mode or automatically by the copier when in the Auto Paper Mode. Select the appropriate mode according to your needs.
55 2. Basic Job Setting Paper Port Indicator and Paper Size Indicators Ex.: If the copier Drawers are loaded with paper as follows ▼ 1139O3690A Making Copies Each time the Paper Select Key is pressed, the lit Paper Size Indicator (arrow ) and Paper Port Indicator cycle through the different paper sizes and port locations as shown below. Chapter 3 1st Drawer ... A4L 2nd Drawer ... B4L 3rd Drawer (Option) ... FLSL 4th Drawer (Option) ... A4C Multi Bypass Table (Option) ...
56 2. Basic Job Setting Auto Paper Mode Selecting the Mode • The Auto Paper Mode can be selected only when the copier is equipped with AF-3 or AFR-7. • In the Auto Paper Mode, the copier automatically selects the correct paper size according to the original size and zoom ratio selected for use. Press the Paper Select Key until the Auto Paper Mode Indicator lights up. Chapter 3 Auto A3 B4 A4 B5 A4 FLS. A5 Inch * Set the zoom ratio. ➭ p.
57 2. Basic Job Setting NOTES • If the paper of the right size has run out in the Auto Paper Mode, both the Paper Size Indicator (arrow ) and Add Paper Indicator light up as shown on the left. If this happens, add paper of the right size or cancel the Auto Paper Mode and use the Manual Mode to make copies. If none of the Drawers are loaded with paper of the right size, both the Auto Paper Mode Indicator and Paper Size Indicator (arrow ) blink as shown on the left.
58 2. Basic Job Setting Number of Copies Setting the Number of Copies 1 2 3 4 5 6 7 8 9 0 C Using the Multi-Copy Keys, enter the number of copies to be made. * The maximum number that can be set is 99. Making Copies Chapter 3 1139O2640A Example: To make 18 copies, press Key ➀ and then Key ➇, in that order. The Multi-Copy Display now shows "18." 1139O3740A Correcting the Number Entry 1 2 3 4 5 6 7 8 9 0 C To correct or reset a number entry, press the Clear Key.
59 2. Basic Job Setting Copy Cycle Start 1 2 3 4 5 6 7 8 9 0 C Energy Saving 50%~200% Auto Darker A B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch Full Size Interrupt Start Stop Panel Reset Paper 1139O1032A 1139O1032A Now you start the copy cycle for the copy job. Starting the Cycle 1 2 1139O2360A Check the control panel to make sure that you have set up your copy job correctly. Making sure it is lit up green, press the Start Key.
60 2. Basic Job Setting Interrupt Mode 1 2 3 4 5 6 7 8 9 0 C Energy Saving 50%~200% Auto Auto Lighter Darker A S Auto A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch Full Size Interrupt Start Stop Panel Reset Paper Chapter 3 1139O1032A 1139O1032A The Interrupt Mode allows you to interrupt a current job and run a more urgent one. The copier ensures that the old job will be resumed as soon as the Interrupt Mode is canceled.
61 2. Basic Job Setting Canceling the Interrupt Mode Press the Interrupt Key a second time. Interrupt 1139O2612A The Interrupt Key LED goes out and the copier restores the settings to the previous state. • The Interrupt Mode cannot be canceled by the Panel Reset Key or Clear Key. • If the current job involves the Sort, Group, or Sort-and-Staple Mode, only Non-Sort modes can be selected in the Interrupt Mode.
62 2. Basic Job Setting Manual Bypass Copying Making Copies Chapter 3 Use the manual bypass copying capability of the copier when you want to make copies on paper not loaded in any Drawer, or on transparencies, translucent paper, or any other special paper. If the copier is equipped with a Multi Bypass Table (option), you can load more than one sheet of such paper to make a continuous run.
63 2. Basic Job Setting Using the Multi Bypass Table 1 Place the original on the Original Glass and make the control panel settings. 2 Swing down the Multi Bypass Table and slide the Paper Guide Plate to the size of the copy paper. 1139O0130A 3 Place a neat stack of copy paper on the Table and insert it into the copier as far as it will go. NOTES • Fan the paper stack well before inserting if you are using transparencies or translucent paper. • Correct curl if you are using heavyweight paper.
64 3. System Copying Overview 1 Make the Basic Settings 2 Select the Job Type 3 • Place your original. • Select the 2-sided copy. • Set the image • Select the 2-sided original. ➭ p. 71 density. • Set the zoom ratio. • Select the paper 2 Select the Finishing Mode • Select the finishing Book 1 Book 2 mode. ➭ p. 78 Sort 2 size. Chapter 3 • Set the number of Sort & Staple copies to be made. ➭ p. 36 Orig. Copy 1139O2522A • Select the Book mode.
65 3. System Copying Overview the 4 Select File Margin 5 Mode • Select the File Select the Cover Mode 6 • Select the Cover Start the Copy Cycle 7 • Call up the job mode. ➭ p. 87 Margin mode. ➭ p. 85 Select the Job Memory • Press the Start program from memory. ➭ p. 88 Key to start the copy cycle. ➭ p. 59 Job Memory Margin Chapter 3 Cover 1139O2562A 1139O2552A program in memory. ➭ p. 88 Drum Dehumidify Input 1139O2360A Cover Job Memory Press the Stop Key to stop the copy cycle.
66 3. System Copying Overview Typical Job Setting Procedures Job Setting Procedures 1. Load your original into the AFR-7. Example 1 Typical Jobs Making 1-sided copies from a 2-sided original ➡ 1. Place the 1st original. Example 2 Making a 2-sided copy from 1-sided originals 1139O0260A ➡ 1139O0250A 1139O0290A 1. Place the open book. Example 3 Making 1-sided copies from an open book ➡ 1134O037AA 1139O6070A Making 2-sided stapled copies from 1-sided originals 1.
67 3. System Copying Overview Job Setting Procedures 2. Select the job type 3. Start the copy (2-sided > 1-sided). cycle. 1 2 2 1 2 2 1 1 2in1 1 2 2in1 1 Book 2 ➡ 1139O2442A 1139O2442A 2. Select the job type 3. Start the 1st copy (1-sided > 2-sided). cycle. 1 2 2 1 2 2 4. Exchange the 1st 5. Start the 2nd copy original for the 2nd. cycle. 1 1 2in1 1 2 2in1 Orig. Book 1 Book 2 ➡ ➡ ➡ 1139O2360A Copy 1139O0270A 1139O2422A 1139O2422A 2. Select the job type (Book > 1-sided).
68 4. System Job Setting Job Type Chapter 3 Sort & Staple 2 1 Group 2 2 1 1 2in1 1 2 2in1 Cover Job Memory Finishing Orig. Book 1 Book 2 Select the appropriate job type to make the intended copies. Copy 1139O2372A 1139O2372A Available Job Types • Select this type when you want to ▲ 1-sided 1-sided Originals Copies make 1-sided copies from 1-sided originals. * The [1-sided 1139O0280A Copy • Select 1 • Select 2 ▲ Originals 1-sided] type is selected in the initial mode.
69 4. System Job Setting Copy Original • Select 2 • Select 1 ▲ 2-sided ▲ ▲ 2-sided 2 when you want to make 2-sided copies from 2-sided originals. ▲ 1-sided 1-sided (2-in-1) Originals Copy 1 [2in1] when you want to make a 1-sided copy, through reduction, from two 1-sided originals which are placed on the Original Glass side-by-side. Chapter 3 1139O0300A ▲ reduction ratio is automatically selected. You can nonetheless make a full-size copy.
70 4. System Job Setting • Select Book ▲ Copies Original • Select Book ▲ ▲ Book 1-sided 1 when you want to make a 1-sided copy of each page of an open book. 1139O6070A ▲ Copy Original 2 when you want to make a 2-sided copy of an open book, each page of the open book being reproduced on one side of the copy. 1139O0330A NOTES • The size of the original should be A4 crosswise for 1 1 [2in1] and 1 2 [2in1].
71 4. System Job Setting Selecting the Job Type 2 1 2 2 • Press Job Type Select Key I to select the job type of your choice. 1 1 2in1 1 2 2in1 Orig. Book 1 Book 2 * Each time Job Type Select Key I is Copy 1 2 2 1139O2412A 1 2 ▲ 1139O2412A pressed, the newly selected job type is indicated by a lit LED as shown below (except for 1-sided 1-sided which is indicated by no LEDs lighting up).
72 4. System Job Setting Precaution for Original Loading Use the following precaution for original loading when you are going to make 1-sided copies from 2-sided originals. Correct: 2-Sided Originals Loaded Crosswise 1-Sided Copies Making Copies Chapter 3 Load the originals crosswise. If the originals are loaded lengthwise, copies will be fed out one inverted from the other.
73 4. System Job Setting Panel Display in 2-Sided Copying ▲ The copier starts a 2-sided copying cycle when you select a mode to make 2-sided copies (i.e., 1 2 or 2 2) and press the Start Key. On completing the first copy cycle, the copier stores the 1-sided copy in the Duplex Unit, getting ready to run the second copy cycle. Canceling 2-Sided Copying When the copier has completed the first copy cycle of a 2-sided copying cycle, there is a 1-sided copy stored in the Duplex Unit.
74 4. System Job Setting Finishing Mode Meter Count Toner Auto Size Margin Chapter 3 The copier offers four different finishing modes to choose from: Non-Sort, Sort, Sort-and-Staple, and Group. Mixed Orig. Det. Sort 1 2 Sort & Staple 2 1 Group 2 2 1 1 2in1 1 2 2in1 Select the appropriate mode according to your particular needs. Cover Drum Dehumidify Input Manual Staple Job Memory Finishing Orig.
75 4. System Job Setting Group • This is the mode in which the copies Copies Originals Top Bin Copies made from each single original are separated into groups, each group containing the same number of copies. 2nd Bin Copies 3rd Bin 1076O147 Originals Top Bin Copies 2nd Bin Copies Place your originals one by one and set the number of copies you need for each original.
76 4. System Job Setting Auto Dual Function Though each of the Sort Bins can only hold up to 25 sheets of paper, the Auto Dual Function permits sorting of copies of up to 50 originals under certain conditions. Auto Dual Function in Sort Mode Making Copies Chapter 3 When 5 or less copies are made from an original set consisting of more than 25 originals in the Sort Mode, the Sorter or Staple Sorter is automatically set into the Auto Dual Mode by using the 6th to 10th Bins.
77 4. System Job Setting When the Number of Copies Set to be Made Exceeds 25 in the Group Mode When more than 25 copies are to be grouped together into one group, the Sorter or Staple Sorter uses the subsequent Bin to continue grouping the copies. 2nd to Nth Bins in Use 1st to 25th copies Top Bin 26th and subsequent copies Same way 2nd Bin Example: Separating copies made from 2 different originals into two groups where each group contains 35 copies.
78 4. System Job Setting Selecting the Finishing Mode Meter Count Toner Drum Dehumidify Input Auto Size Margin Manual Staple Sort Mixed Orig. Det. 1 2 1 1 2in1 1 2 2in1 Sort & Staple 2 1 Group 2 2 * Each depression of the Key selects Cover Job Memory Finishing Press the Finishing Mode Select Key as necessary to select the desired mode. Orig. Book 1 Book 2 a new finishing mode, as indicated by a lit LED.
79 4. System Job Setting Using the Manual Staple Mode 1139O2732A 1139O1320A 1 2 Align the edges of the sheets of paper to be stapled together. Place the neat stack of paper on the Top Bin of the Staple Sorter. NOTES • Make sure of the stapling position Stapling Position 1139O0940A and press the neat stack of paper against the bracket (which is invisible from the outside) at the front right corner in the Bin. • Up to 25 sheets (80 g/m 2) of paper can be placed for stapling.
80 4. System Job Setting Precautions for Original Loading for Copies Stapled Automatically or Manually If you want to have your copy sets or stacks stapled automatically in the Sort-and-Staple Mode or manually in the Manual Staple Mode, position the originals crosswise. The originals should also be placed so that the stapling position (marked with X) is positioned as shown.
81 4. System Job Setting Wrong: Copy Set/Stack Stapled at Top Right Corner 1139O1170A Place the original, with its stapling point at the upper right position as shown in the illustration.
82 4. System Job Setting Typical Finishing Mode Finishing Mode Manual Stapling Examples Ex.: Making two copies each. Original Set Copy Set Chapter 3 Non-Sort Impossible Making Copies 1076O154 Ex.: Sorting copies into 2 copy sets and having them stapled Ex.: manually.
83 4. System Job Setting Finishing Mode Manual Stapling Examples Ex.: Sorting and stapling copies into 2 copy sets. Stapled Copy Sets Original Set Sort-andStaple Ex.: Separating copies into 3 groups, each group containing 2 Ex.: copies, and having each stapled manually.
84 4. System Job Setting File Margin Mode Meter Count Toner Drum Dehumidify Manual Staple Margin Mixed Orig. Det. Sort 1 2 Sort & Staple 2 1 Group 2 2 1 1 2in1 1 2 2in1 Cover Job Memory Finishing Orig. Book 1 Book 2 When in the File Margin Mode, the copier provides a file margin along the leading edge of the copy. Both 1-sided and 2-sided originals can be used in the File Margin Mode. Select the appropriate job type according to your originals.
85 4. System Job Setting Loading the Originals Position the file margin side to the left. Chapter 3 Using AF-3/AFR-7 1 2 Place the original. Making Copies Using the Original Glass 3 Press the Job Type Select Key to select the appropriate job type. 1139O0910A Position the file margin side to the right. 1139O0930A Setting the File Margin Mode Margin Press the File Margin Mode Key to set the copier into the File Margin Mode. 1139O2552A 1 2 2 1 2 2 1 1 2in1 1 2 2in1 Orig.
86 4. System Job Setting Cover Mode Meter Count Toner Drum Dehumidify Chapter 3 Input Auto Size Margin Manual Staple The Cover Mode lets you make a front cover for a copy set by copying the first page of an original set on colored paper. Mixed Orig. Det. Sort 1 2 Sort & Staple 2 1 Group 2 2 1 1 2in1 1 2 2in1 Cover Job Memory Finishing Orig. Book 1 Book 2 It may be used to differentiate the cover of a copy set from the others.
87 4. System Job Setting Setting the Cover Mode 1 Place the paper for the cover on the Multi Bypass Table. NOTE 2 Load your originals into Automatic/Duplexing Document Feeder AF-3/AFR-7. 3 Press the Cover Mode Key to set the copier into the Cover Mode. 1139O0210A Cover 1139O2562A NOTE Be sure to place the paper for the cover on the Multi Bypass Table. No copies can be made for covers unless the Multi Bypass Table is loaded with paper.
88 4. System Job Setting Job Memory Meter Count Toner Drum Dehumidify Margin Manual Staple One copying job program that is frequently used can be stored in memory and called up later as necessary. Mixed Orig. Det. Sort 1 2 Sort & Staple 2 1 Group 2 2 1 1 2in1 1 2 2in1 Cover Job Memory Finishing Orig. Book 1 Book 2 Copy 1139O2372A 1139O2372A Drum Dehumidify Making Copies Chapter 3 Input Auto Size Input Cover Job Memory 1139O2582A 1 2 Press the Job Memory Input Key.
89 Chapter 4 Special Functions 1. Checking the Total Number of Copies Mode 90 2. Auxiliary Toner Replenishing Mode (Increasing the Image Density) 92 3. Drum Dehumidify Function 93 4. User’s Choice 94 Special Functions Chapter 4 This Chapter explains about the special function that you can use for specific purposes.
90 1. Checking the Total Number of Copies Mode Meter Count Auto Size Manual Staple Mixed Orig. Det. 50%~200% Toner Drum Dehumidify Input Margin Sort 1 2 Sort & Staple 2 1 Group 2 2 1 1 2in1 Auto 1 2 2in1 Cover 1 Book 2 Book Job Memory Finishing Orig. A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS.
91 1. Checking the Total Number of Copies Mode Using the Meter Count Function 1 Press the Meter Count Key once. 2 Each time the Meter Count Key is then pressed, the count of a new Counter is shown in the following order. Margin 1139O2492A 1139O2492A 50%~200% The count of the Total Counter is shown across the Zoom Ratio Indicator and Multi-Copy Display. 50%~200% Ex.: Total Counter count: Ex.: 12,345 (copies) Ex.: Size Counter count: Ex.
92 2. Auxiliary Toner Replenishing Mode 2. (Increasing the Image Density) Meter Count Toner Drum Dehumidify Input Auto Size Margin Manual Staple The copier tends to exhaust the supply of toner rapidly when making a number of copies from an original with dark solid areas. As a result, the image density of the copy will become lighter. In such a case, you can set the copier into the Auxiliary Toner Replenishing Mode. Mixed Orig. Det.
93 3. Drum Dehumidify Function Meter Count Toner Drum Dehumidify Input Auto Size Manual Staple Margin Mixed Orig. Det. Sort 1 2 Sort & Staple 2 1 Group 2 2 1 1 2in1 1 2 2in1 Cover Job Memory Finishing Orig. Book 1 Book 2 During high humidity periods or when there are sudden steep changes in humidity (especially when you are using a heater in winter), condensation*1 could form on the surface of the PC Drum*2, resulting in blotchy copies being produced.
94 4. User’s Choice The copier has been set so that the most frequently used settings are to be selected in the initial mode. The User’s Choice allows you to select the priority settings which are automatically selected in the initial mode according to your own needs. 50%~200% A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS.
95 4. User’s Choice Description of Each User’s Choice Function U-0 Original I • Selects either one of the following settings when the copier is equipped with a Duplexing/Automatic Document Feeder AFR-7/AF-3. If "0" is selected: You can make copies from originals of assorted sizes. (Mixed Original Detection Mode) If "1" is selected: You can make copies only from originals of the same size; but you gain in copying speed, instead.
96 4. User’s Choice U-10 Paper port priority • Specifies the paper size or paper port selected automatically when the copier has been set so that either one of the following conditions is selected in the initial mode.
97 4. User’s Choice U-13 Priority auto exposure level • Determines the priority exposure level in the Auto Exposure Mode when the copier has been set so that the Auto Exposure Mode is selected in the initial mode. Setting Value Initial Setting Description Low (level 3) Low (level 2) 49 50 Low (level 1) Standard 51 High (level 1) 52 High (level 2) O * When the exposure level is "Low," the greater the level number the lower the exposure level.
98 4. User’s Choice U-14 Priority exposure mode/level • Determines the priority exposure mode, either Auto or Manual, selected when the control panel settings are reset. If Auto is selected, this function also allows you to specify the priority exposure level (EXP) in the Manual Exposure Mode, as it is selected when the Auto Exposure Mode is canceled. If Manual is selected, the function also allows you to specify the priority exposure level (EXP) in the Manual Exposure Mode.
99 4. User’s Choice Priority to Manual Exposure Mode Setting Value 10 11 12 13 14 15 16 17 18 Description Manual Exposure Mode / EXP1 Manual Exposure Mode / EXP2 Manual Exposure Mode / EXP3 Manual Exposure Mode / EXP4 Manual Exposure Mode / EXP5 Manual Exposure Mode / EXP6 Manual Exposure Mode / EXP7 Manual Exposure Mode / EXP8 Manual Exposure Mode / EXP9 Initial Setting exposure level will be lower as the number becomes smaller and higher as the number becomes greater.
100 4. User’s Choice U-15 Finishing mode priority • Determines the priority finishing mode when the copier is equipped with a Sorter or Staple Sorter. Setting Value 0 Description Non-Sort 1 2 Sort Group 3 Sort-and-Staple Initial Setting O Special Function Chapter 4 U-20 Auto panel reset ON/OFF • Selects whether or not to activate the auto panel reset function after the lapse of 60 sec. after a copy cycle has been completed or a Key on the control panel operated.
101 4. User’s Choice U-21 Energy Saving Mode ON timing • Selects whether or not to set the copier into the Energy Saving Mode after a given time after a copy cycle has been completed or a Key operated. If "0" is selected: The copier is not set into the Enemy Saving Mode after the given time. If "1" is selected: The copier is automatically set into the Energy Saving Mode after the given time. The time it takes the copier to enter the Energy Saving Mode can also be selected from among 1 to 10 min.
102 4. User’s Choice U-24 Sort/Non-Sort switching ON/OFF • Specifies whether to enable or disable the function that automatically switches between the Sort and Non-Sort Mode under either of the following conditions when the copier is equipped with a Sorter or Staple Sorter and a Duplexing/Automatic Document Feeder. • The copy cycle is initiated using a single original in the Sort Mode. • The copy cycle is initiated to make two or more copies using two or more originals in the Non-Sort Mode.
103 4. User’s Choice Making the User’s Choice Mode Settings 1 Panel Reset Keep pressing the Panel Reset Key for about 3 sec. * Uappears on the Zoom Ratio Indicator, which the Multi-Copy Display goes out. 1139O4782A 1139O4782A Multi-Copy Display Zoom Ratio Indicator 2 3 4 5 6 7 8 9 0 C 2 Using the Multi-Copy Keys, enter the number corresponding to the desired Choice Code. * If you have pressed a wrong number, press the Clear Key, then enter the correct number.
104 4. User’s Choice 3 Press the Start Key. * This validates the choice code selection. 1139O2360A Multi-Copy Display Zoom Ratio Indicator 1139O3880A 1139O3880A Special Function Chapter 4 1139O3870A 1139O3870A 1 2 3 4 5 6 7 8 9 0 C 4 Press the Clear Key. * This clears the current setting (shown on the Multi-Copy Display) of that particular choice code.
105 4. User’s Choice 1 2 3 4 5 6 7 8 9 5 See p. 95 for the setting values of each choice code. * The Multi-Copy Display shows the new setting. 1139O4870A Zoom Ratio Indicator Press the appropriate Multi-Copy Key or Keys to enter the new setting. Multi-Copy Display 1139O3870A 1139O3870A 1139O3890A 1139O3890A Repeat steps 2 through 6 to make new settings of other functions.
106
107 Chapter 5 When an Indicator Lights Up (Replenishing Supplies, Clearing Misfeeds, and Correcting a Closure Failure) Call-Tech.-Rep. Indicator 149 When an Indicator Lights Up 1. Quick Reference for Indicator Lights 108 2. Detailed Instructions for Indicator Lights Add Toner Indicator 110 Add Paper Indicator 112 Add Staple Indicator 116 I.U.
108 1. Quick Reference for Indicator Lights 1 2 3 4 5 6 7 8 9 0 C Energy Saving 50%~200% Auto Auto Lighter Darker A S Auto A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch Full Size Interrupt Start Stop Panel Reset Paper 1139O1032A When an Indicator Lights Up Chapter 5 When the copier encounters any of the following conditions, a corresponding warning indicator lights up.
109 1. Quick Reference for Indicator Lights Indicator Closure Failure Indicator Copier State A copier Door is left open or an option is left loose. ➭ p. 130 1139O3920A Misfeed Indicator There is a sheet of paper misfed inside the copier or option (including the AF-3/AFR-7). Check the Monitor Display for the location of the misfeed and clear the sheet of paper misfed as instructed. ➭ p.
110 2. Detailed Instructions for Indicator Lights Add Toner Indicator 50%~200% Auto A4 A3 B4 S Auto A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 The Add Toner Indicator lights up when toner in the Toner Bottle is running out. Once the Indicator has lit up, replace the Toner Bottle with a new one as soon as possible by following the procedure given below. Inch 1139O5412A When an Indicator Lights Up Chapter 5 Replacing the Toner Bottle 1 Swing down the Front Door.
111 2. Detailed Instructions for Indicator Lights 4 With the Seal on the Toner Bottle facing ups slowly peel off the Seal as illustrated. NOTE Be careful, some toner may puff out from the bottle. 1139O1390A 5 Ensuring that the arrow on the Toner Bottle faces towards you, insert the Bottle into position. NOTE 6 Swing close the Toner Bottle Holder and close the Front Door. 1139O1400A NOTES • Try to replace the Toner Bottle with a new one as soon as possible once the Add Toner Indicator has lit up.
112 2. Detailed Instructions for Indicator Lights Add Paper Indicator 50%~200% Auto Auto Lighter Darker A A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Full Size When the Drawer currently selected for use has run out of paper, the Add Paper Indicator lights up and the Start Key turns to orange. At this time, no new copy cycle can be initiated. Inch Paper 1139O5462A Use the following procedure to load the Drawer with paper.
113 2. Detailed Instructions for Indicator Lights 3 Slide out the Edge Guide and Trailing Edge Stop in the direction of the arrows. 4 Load the paper stack into the Drawer so that its front side (the side facing up when the package was unwrapped) faces down. Make sure that the paper stack rests under the two catches of the Drawer. NOTE 1139O0470A 5 1139O0420A The paper should be loaded no higher than the ▼ (Max. Level Indicator) on the Edge Guide.
114 2. Detailed Instructions for Indicator Lights Adding Paper (2nd Drawer) Monitor Display Add Paper Indicator The indications on the left show that the 2nd Drawer has run out of paper. 1139O3910A 1139O5290A 1139O5290A 1 Slide out the 2nd Drawer and press down the Paper Lifting Plate until it is locked into position. 2 Unwrap the package of copy paper and fan the paper stack thoroughly. 3 Load the paper stack into the Drawer so that its front side faces down.
115 2. Detailed Instructions for Indicator Lights Adding Paper (3rd, 4th Drawer) Monitor Display Add Paper Indicator The indications on the left show that the 3rd Drawer has run out of paper. 1139O3910A 1139O3980A 1139O3980A 1 Slide out the 3rd Drawer. 2 Unwrap the package of copy paper and fan the paper stack thoroughly. 3 Load the paper stack into the Drawer so that its front side faces down. Make sure that the paper stack rests under the two catches of the Drawer.
116 2. Detailed Instructions for Indicator Lights Add Staple Indicator When staples have run out, the Add Staple Indicator lights up. Replace the Staple Cartridge with a new one by following the procedure given below. 50%~200% Auto A4 A3 B4 A3 Auto A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch 1139O0302A When an Indicator Lights Up Chapter 5 Replacing the Staple Cartridge 1 Press the Lock Release Lever of the Staple Sorter and slide the Staple Sorter away from the copier.
117 2. Detailed Instructions for Indicator Lights NOTE Check that no portion of the staple sheet is out of the Cartridge. Break off any portion of the sheet that is out of the Cartridge. 1139O0500A 4 Insert the new Staple Cartridge until a click is heard. Then, close the Staple Cover. 5 Slide the Staple Sorter back against the copier. 6 Place a sheet of paper into the Top Bin of the Staple Sorter.
118 2. Detailed Instructions for Indicator Lights Meter Count Toner Auto Size Margin Manual Staple Sort Mixed Orig. Det. 1 8 Remove the sheet of paper from the Top Bin and check that staples have been driven into it. 1 Test-staple the paper several times. Cover Book Group Input 1 1 2in1 Press the Manual Staple Key.
119 When an Indicator Lights Up Chapter 5 2.
120 2. Detailed Instructions for Indicator Lights I.U. Service Life Indicator 50%~200% Auto Auto A4 A3 B4 A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 When time is about to come when the Imaging Unit needs replacement, the I.U. Service Life Indicator starts blinking to prompt you to replace it with a new one. Replace the Imaging Unit by following the procedure given below.
121 2. Detailed Instructions for Indicator Lights Precautions for Handling • Do not leave the I. U. in a bright place. 1139O6032A • Do not store the I. U. in a hot place of 40°C (104°F) or more. place or subject to water splash. 1139O6052A • Do not store the I. U. upside down or tilted. Do not subject the I. U. to vibration. 1139O6062A When an Indicator Lights Up • Do not store the I. U.
122 2. Detailed Instructions for Indicator Lights Removing the I. U. from copier 1 Swing down the Front Door. Turn the Lock Release Lever counterclockwise to swing up the Upper Half of the copier. 2 Turn the I. U. Lock Release Lever and, while holding it down, pull the I. U. halfway out from the copier. 3 Firmly grasp the I. U. with both hands and pull it all the way out of the copier.
123 2. Detailed Instructions for Indicator Lights Unpacking the I. U. Starter Bottle I. U. 1 2 3 Peel off the piece of tape and open the Carton Box. 1 Take the I. U. out of the bag. 2 Peel off the three pieces of tape and packing materials. Take the Starter Bottle out from the Carton Box. Take the I. U. with its bag out of the Carton Box. 4445U002AA 4445U003AA When an Indicator Lights Up Setting up the I. U.
124 2. Detailed Instructions for Indicator Lights 3 Carefully pull the polyester tape from the I. U.. 4 Remove the Cap from the I. U. and re-fit it to the used I. U. as shown in the illustration. 5 Align the I. U. with the Rails in the copier. 6 Slide the I. U. all the way into the copier.
125 2. Detailed Instructions for Indicator Lights 7 Be sure to push the I. U. into the locked position until a click is heard. Then, check to see the position of Lock Release Lever, as shown in the illustration. NOTE 4445U005AA An improperly installed I. U. could be a cause of copier malfunction. 8 Lower the Upper Half of the copier and push it into the locked position by pushing down on the portion marked with "Push Down Here Only".
126 2. Detailed Instructions for Indicator Lights 1 Swing out the Bottle Holder. 2 Hold the Starter Bottle so that its tab is on the upper side, shake it well. Chapter 5 3 Peel off the tape from the Starter Bottle. When an Indicator Lights Up Charging the Copier with Starter and Toner 4 Align the markings on the Starter Bottle with the upper side of the Bottle Holder and slide the Bottle into position.
127 2. Detailed Instructions for Indicator Lights 5 6 7 Close the Front Door. 8 The copier automatically start the charging cycle for approximately 5 minutes. 1139O6012A Plug the Power Cord into the Wall Outlet. Turn ON the Power Switch. This with cause the wait indicator to be shown on the control panel. 1139U011AA When the copier has been completely charged with Starter, the indication on the Magnification Ratio Indicator changes to "100" and the cycle stops.
128 2. Detailed Instructions for Indicator Lights 9 Swing down the Front Door, swing out the Bottle Holder, and remove the Starter Bottle. 10 Hold the Toner Bottle so that its tab is on the upper side, shake it well, and peel off the tape. 4445U009AA Once the tape has been removed, hold the Bottle so that its Toner Port faces up.
129 When an Indicator Lights Up Chapter 5 2.
130 2. Detailed Instructions for Indicator Lights Closure Failure Indicator 50%~200% Auto Auto A4 A3 B4 A3 Full Size Lighter Darker A B4 A3 A4 A4 1139O0322A 1139O0322A Monitor Display Only the Closure Failure Indicator lights up. The Closure Failure Indicator lights up if a copier Door or Cover is left open, or an option is left loose. At this time, the Monitor Display shows the location of the closure failure. The Start Key turns to orange and you can no longer start a new copy cycle.
131 2. Detailed Instructions for Indicator Lights Monitor Display Check Locations Check that the Right Door is closed. 1139O4950A 1139O0590A Check that the Left Door is closed. 1139O0610A 1139O4010A Check that the Lower Right Door is closed. 1139O0620A 1139O4030A Chapter 5 Check that the Lower Left Door is closed. 1139O0640A Check that the Duplex Unit is locked into position. 1139O4040A 1139O0630A Check that the Sorter S-104 or Staple Sorter ST-101 is in position.
132 2. Detailed Instructions for Indicator Lights Misfeed Indicator 50%~200% Auto Auto A4 A3 B4 A3 Full Size Lighter Darker A B4 A4 A3 A4 1139O0332A If a paper misfeed occurs during a copy cycle, that copy cycle is halted in mid-operation. At this time, the Misfeed Indicator lights up and the Monitor Display shows where the misfeed has occurred. In addition, the Start Key turns to orange and no new copy cycle can now be initiated.
133 2. Detailed Instructions for Indicator Lights Monitor Display Misfeed Location Misfeed in the Paper Feed Cabinet ➭ p. 140 1139O4100A 1139O1262A Misfeed in the Duplex Unit ➭ p. 142 1139O4080A 1139O6002A 1139O1262A 1139O1190A Misfeed in the Sorter/Staple Sorter (S-104/ST-101) ➭ p. 148 1139O4090A 1139O1992A Blinking : There is a Light misfeed at that location. Steady : There might be Light a sheet of paper stopped at that location.
134 2. Detailed Instructions for Indicator Lights Misfeed Clearing Procedure: Copier There is a sheet of paper misfed between the Fusing Unit and Transport Section. NOTE Use care not to touch the areas marked with , "High Voltage", and "Caution/Hot" with bare hands. 1139O4120A 1 Swing down the Front Door and turn the Lock Release Lever counterclockwise to unlock and swing up the Upper Half of the copier.
135 2. Detailed Instructions for Indicator Lights 3 Remove any sheet of paper from the Transport Section. 4 Gently swing down and lock the Upper Half of the copier and close the Front Door. 1139O0670A Unlock Stopper M2 . Then, gently swing down and lock the Upper Half of the copier and close the Front Door. 1139O0900A This completes the procedure to clear a sheet of paper misfed between the Fusing Unit and Transport Section.
136 2. Detailed Instructions for Indicator Lights Misfeed Clearing Procedure: Copier There is a sheet of paper misfed between the Manual Bypass Port and Paper Take-Up Section. 1139O4130A 1 Swing down the Front Door and turn the Lock Release Lever counterclockwise to unlock and swing up the Upper Half of the copier.
137 2. Detailed Instructions for Indicator Lights 4 5 Pull out the sheet of paper from the Paper Take-Up Section. 6 Gently swing down and lock the Upper Half of the copier and close the Front Door. Close the Right Door. 1139O0720A Unlock the Stopper M2 . Then, gently swing down and lock the Upper Half of the copier and close the Front Door. 1139O0900A 7 1139O0400A Slide out the 1st Drawer and unload the paper from the Drawer. Next, push down the Paper Lifting Plate until it is locked into position.
138 2. Detailed Instructions for Indicator Lights 8 Fan the paper and reload it. NOTE Make sure that the paper stack rests under the two catches of the Drawer. 1139O0410A When an Indicator Lights Up Chapter 5 1139O0430A 9 10 Slide the 1st Drawer back in. In the same way, unload and reload the paper stack in the 2nd Drawer. This completes the procedure to clear a sheet of paper misfed between the Manual Bypass Port and Paper Take-Up Section.
139 When an Indicator Lights Up Chapter 5 2.
140 2. Detailed Instructions for Indicator Lights Misfeed Clearing Procedure: Paper Feed Cabinet There is a sheet of paper misfed in the Paper Feed Cabinet (Transport Section). 1139O4100A 1 Open the Lower Right Door. 2 Close the Lower Right Door. 3 Slide out the 3rd Drawer and unload the paper from the Drawer. Pull out the sheet of paper.
141 2. Detailed Instructions for Indicator Lights 4 Fan the paper and relad it. 5 Slide the Drawer back in. 6 In the same way, unload and reload the paper stack in the 4th Drawer. This completes the procedure to clear a sheet of paper misfed in the Paper Feed Cabinet.
142 2. Detailed Instructions for Indicator Lights Misfeed Clearing Procedure: Duplex Unit There is a sheet of paper misfed in the Duplex Unit and the Transport Section near the Left Door. 1139O4080A 1 Swing down the Front Door and turn the Lock Release Lever counterclockwise to unlock and swing up the Upper Half of the copier.
143 2. Detailed Instructions for Indicator Lights 4 Open the Lower Right Door and pull out the sheet of paper from the Transport Section. 5 Close the Lower Right Door. 6 Gently swing down and lock the Upper Half of the copier and close the Front Door. 1139O0770A Unlock Stopper M2 . Then, gently swing down and lock the Upper Half of the copier and close the Front Door. 1139O0900A 7 1139O0780A Slide out the Duplex Unit and open the Misfeed Removal Guide Plate.
144 2. Detailed Instructions for Indicator Lights 8 9 Pull out the sheet of paper from the Duplex Unit. Close the Misfeed Removal Guide Plate and slide the Duplex Unit back into the copier. 1139O0800A 10 When an Indicator Lights Up Chapter 5 1139O0760A Swing down the Front Door and then swing it back into the closed position to reset the Misfeed Indicator on the control panel. This completes the procedure to clear a sheet of paper misfed in the Duplex Unit.
145 When an Indicator Lights Up Chapter 5 2.
146 2. Detailed Instructions for Indicator Lights Misfeed Clearing Procedure: Duplexing Document Feeder There is an original misfed in Duplexing Document Feeder AFR-7. 1139O4110A 1 Swing open Document Feed Unit Door F1 and gently pull out the original. 2 Holding down Document Turnover/Exit Unit Door Lock Release Key F2 , swing open Document Turnover/Exit Unit Door F3 . Carefully pull out the original from the Exit Unit and close F3 .
147 2. Detailed Instructions for Indicator Lights Misfeed Clearing Procedure: Automatic Document Feeder There is an original misfed in Automatic Document Feeder AF-3. 1139O4110A 1 Holding down the Document Release Key, gently pull out the original. 2 Carefully pull out the original from the Exit Unit. 3 4 Raise the AF-3. 5 Remove the original from the Original Glass and lower the AF-3.
148 2. Detailed Instructions for Indicator Lights Misfeed Clearing Procedure: Sorter or Staple Sorter There is a sheet of paper misfed in 10-Bin Sorter S-104 or Staple Sorter ST-101 (Transport Section). 1139O4090A 1 Take hold of the Lock Release Lever of S-104/ST-101 and, at the same time, slide the S-104/ST-101 away from the copier. 2 Pull out the copy from the Transport Section. 3 Slide the S-104/ST-101 back to the copier.
149 2. Detailed Instructions for Indicator Lights Call-Tech.-Rep. Indicator 50%~200% Auto Auto Lighter Darker A A4 A3 B4 Auto A3 A3 B4 Full Size A4 B5 B4 A4 A4 FLS. A3 A4 A5 Inch 1139O0342A 1139O0342A Swing down the Front Door, then close it. This resets the Call-Tech.-Rep. Indicator. ◆ If the Call-Tech.-Rep. Indicator lights up again, call your Tech. Rep. immediately. 1139O0760A NOTE When calling your Tech. Rep.
150
151 Chapter 6 Troubleshooting 2. The Copier is Not Activated • No Indicators on the Control Panel light up 156 • Pressing The Start Key does not start the copy cycle 156 • Control panel Keys do not respond 158 • The Copier is not activated when the Power Switch is turned ON 158 Troubleshooting 1.
152 1. When this Type of Copy is Produced Symptom The Image is too light. Possible Cause The exposure level for the Auto Exposure Mode is set at one of the "Light" levels. The manual exposure level is set on the lighter side. You have been making copies from a photo or an original with a large dark area. 1074O108 The Toner Bottle has just been replaced. The Add Toner Indicator on the Warning Information Display is lit up. Add Toner Indicator 1139O3910A The paper is damp.
153 1. When this Type of Copy is Produced Action Change the setting of the User’s Choice Mode U-13, Priority Auto Exposure Level. ➭ p. 97 Cancel the Auto Exposure Mode to select the Manual Exposure Mode and adjust the exposure level to obtain a darker image. ➭ p. 47 Press the Exposure Control Key (Darker) as necessary to obtain a darker image. ➭ p. 47 The copier needs more toner. Execute Auxiliary Toner Replenishing as many times as is required to obtain the desired image density. ➭ p.
154 1. When this Type of Copy is Produced Symptom The Copy has lines. Possible Cause The Corona Units are dirty. 1139O1670A The Copy has dark specks or spots. The Original Glass is dirty. The Original Pad or Document Feed Belt is dirty. The original is very thin or highly transparent. The original is two-sided. 1139O1660A Troubleshooting Chapter 6 The Edge of the Copy is dirty. 1139O1690A The Image on the Copy is not aligned properly. The Original Pad or Document Feed Belt is dirty.
155 1. When this Type of Copy is Produced Action Using the Corona Unit Cleaning Levers, clean the Corona Units. ➭ p. 176 Wipe the Original Glass clean of dirt with a soft dry cloth. ➭ p. 174 Wipe clean the Original Pad or Document Feed Belt with a soft cloth dampened with neutral detergent. ➭ p. 174 Place a blank sheet of paper over the original for making copies. ➭ p. 38 The information on the back side of a two-sided, thin original can be slightly reproduced on the copy.
156 2. The Copier is Not Activated Symptom Check for: No Indicators on the control Is only the Start Key lit up green? panel light up. Pressing the Start Key does Is the Wait Indicator lit up? not start the copy cycle.
157 2. The Copier is Not Activated Action The copier is in the Energy Saving Mode. Press any Key on the Control Panel to cancel the Energy Saving Mode. The copier is now warming up. Please wait. ➭ p. 29 The conditions for the set copy mode are not met. Refer to NOTES in the setting procedure of each mode and correct the setting as necessary. Auto Paper Mode ➭ p. 57 • The paper size automatically selected has run out. • The paper size automatically selected is not loaded in any of the Drawers.
158 2. The Copier is Not Activated Symptom Control panel Keys do not respond. Check for: Is the Interrupt Key LED lit up? Interrupt Interrupt Key Action The copier has is in the interrupt mode. Press the Interrupt Key to cancel the interrupt mode. ➭ p. 61 1139O2602A The Copier is not activated when the Power Switch is turned ON. Is the power cord plugged into the power outlet? Is the room circuit breaker open? Plug the power cord into the power outlet. Close the room circuit breaker.
159 Chapter 7 Specifications Chapter 7 1. Copier EP1080 160 2. Duplex Unit AD-3 162 3. Paper Feed Cabinet PF-201 163 4. Duplexing Document Feeder AFR-7 164 5. Automatic Document Feeder AF-3 165 6. Staple Sorter ST-101 166 7. 10 Bin Sorter S-104 167 8. Multi Bypass Table MB-1 168 9. Copier Outline Dimensions 169 Specifications This Chapter gives complete specifications of the copier system and options.
160 1.
161 Fixed ratios Full size: 1:1±0.5% Reduction Ratios: 50%, 70%, 81% Enlargement Ratios: 115%, 141%, 200% Zoom ratios: From 50% to 200% in 1% increments Multiple Copy Up to 99 copies (Count-Down system) Exposure Control Auto and Manual Power Requirements AC 110V, 115V, 120V, 127V; 14.5A AC 200V/220V, 220V-240V; 8.8A 50/60Hz Power Consumption 1.5 Kw (Max.) Dimensions Width : 610 mm (Excluding Copy Tray, Manual Feed Tray) Depth : 609 mm Height : 480 mm (Including Original Cover) Weight 54.
Chapter 7 Specifications 162 2.
163 Paper Feed Cabinet PF-201 Type Desk Type Cabinet with two Paper Drawers Installation Desk type Kinds of Paper Plain paper, Recycled paper: Weighing 60 to 90 g/m 2 Copy Paper Size 3rd, 4th Drawer: A3L, B4L, A4L, A4C, A5L, FLSL 210 × 280 mm L, 280 × 210 mm C 216 × 297 mm L, 216 × 320 mm L 220 × 280 mm L, 220 × 330 mm L 280 × 420 mm L, 210 × 330 mm L Registration Front edge Paper Feeding System Automatic feeding from drawer Total Drawer Capacity: 1,000 sheets (500 sheets ×2) Power Source DC24
164 4.
165 5.
166 6. Staple Sorter Name Staple Sorter ST-101 Type 10-Moving-Bin Sorter with Automatic Stapler Installation Attached to copier Registration Front edge No.
167 7. 10 Bin Sorter Name 10 Bin Sorter S-104 Type 10-Moving-Bin Sorter Installation Attached to copier Registration Front edge No.
168 8.
169 9.
170
171 Chapter 8 Miscellaneous This Chapter explains about care of copier and the various possible combinations of functions. Chapter 8 2. Function Combination Matrix 178 3. Description of Paper Size 180 4. Zoom Ratio Table (Original Size to Paper Size) 181 5. Index 182 Miscellaneous 1.
172 1. Care of the Copier To keep your copier in good shape at all times, make the following daily checks and cleaning. Daily Checks Power Cord, Communications Cable, Ground Cable Item Is the copier placed on its power cord or other Cables? Is the copier placed on cables of other electrical equipment? Are the cord and cables free of damage or cracks? Action It could result in the copier or other electrical equipment malfunctioning. Move the copier immediately.
173 1. Care of the Copier Original Cover, Duplexing/Automatic Document Feeder Item Is the Original Pad or Document Transport Belt dirty? Is the Original Pad or Document Transport Belt scratched? Action Clean the Pad or Belt using the procedure given in "Cleaning." ➭ p. 174 Call your Tech. Rep. Copy Paper Item Is the paper damp and wavy? Action ➭ p. 112 Replace the paper. Sound of Copier Operation Item Is there any unusual noise heard while the copier is running? Action Call your Tech. Rep.
174 1. Care of the Copier Cleaning Housing Cover Wipe clean the surface of the Housing Cover with a soft cloth dampened with neutral home detergent. 1139O1820A Original Pad 1 2 Raise the Original Cover. 1 2 Raise the Original Cover. Wipe clean the surface of the Original Pad with a soft cloth dampened with neutral home detergent. 1139O1830A Chapter 8 Miscellaneous Original Glass 1139O1840A Wipe clean the surface of the Original Glass with a soft, dry cloth.
175 1. Care of the Copier Control Panel 1 2 Turn the Power Switch OFF. Wipe clean the surface of the control panel with a soft, dry cloth. NOTE 1139O1850A NEVER use a glass cleaner or any other detergent to avoid damage to the control panel keys. Front Door 1 2 Swing down the Front Door. Wipe clean the inside of the Front Door with a soft cloth.
176 1. Care of the Copier Corona Units 1 2 Swing down the Front Door. 3 Gently slide the Cleaning Lever back into the original position. 4 Gently slide out the Corona Unit Cleaning Lever (Lower) as far as it will come. 5 6 Gently slide the Cleaning Lever back into the original position. Gently slide out the Corona Unit Cleaning Lever (Upper) as far as it will come. 1139O1870A 1139O1880A Chapter 8 Miscellaneous 1139O1890A 1139O1900A Repeat steps 2 through 5 two to three times.
177 1. Care of the Copier Document Transport Belt 1 2 Raise the AF-3/AFR-7. 3 Hold the Document Transport Belt on both edges and pull it to the left to expose a fresh surface. 4 Wipe clean the fresh surface using the soft cloth dampened with neutral home detergent. Wipe clean the surface of the Document Transport Belt with a soft cloth dampened with neutral home detergent. 1139O1910A 1139O1920A Repeat these steps until the entire surface of the Belt is wiped clean.
178 2.
179 2. Function Combination Matrix Conditions for Combined Functions A to F: The settings can be made only when the copier is equipped with the following options. A : Duplex Unit AD-3 B : Duplexing Document Feeder AFR-7 C : Automatic Document Feeder AF-3 D : 10-Bin Sorter S-104 E : Staple Sorter ST-101 F : Multi Bypass Table MB-1 ▲ G : The Cover mode cannot be selected when any of the following settings has been made for Org. Copy.
180 3.
181 4.
Chapter 8 A A.S. : Auto Size Mode 51 A.P. : Auto Paper Mode 56 A.P./A.S./Manual Priority 96 Add Paper 25, 108, 112 Add Toner 27, 108, 110 Auto Clear for Pulug-in Counter 101 Auto Copy Start Function 30 Auto Dual Function 76 Auto Exposure Mode 46 Auto Reset Function 33 Automatic Drawer Switching 57 Auxiliary Toner Replenishing Mode 92 Available Job Types 68 B Book Book C Call-Tech.-Rep.
183 File Margin Mode 84 Finishing Mode 74 Finishing Mode Priority 100 Fixed Zoom Ratios 48 Full Size Copy 49 Function Combination Matrix 178 G Group Mode 75 H Hight Speed Mode 95 I I.U.
184 O 1-sided 1-sided 68 1-sided 1-sided (2-in-1) 69 1-sided 2-sided 68 1-sided 2-sided (2-in-1) 69 Original Copy (Job Type Select Key Ι) 71 Original Copy (Job Type Select Key ΙΙ) 71 Original Placement 38 P Panel Restting 33 Paper Port Priority 96 Paper Size 54 PC Drum 93 Power Switch 10, 28 Priority Exposure Mode/Level 98 R Reduction Ratios 49 Remove Original Warning Beep 44 Remove Copies Indicator 27 Replacing the Toner Bottle 110 S Size Counter 90 Sort Mode 74 Sort-and-Staple mode 74 Sort/Non-Sor
185 Weit Indicator 27 Z Zoom Ratios 48 Zoom Ratio Table (Original Size to Paper Size) 53, 181 Chapter 8 W Miscellaneous 5.
