Operation Manual

FILM DRIVE

The camera has three film-drive modes. In single-frame advance mode, the

camera makes one exposure and advances the film one frame each time you

press the shutter-release button. In high-speed continuous mode (H), the film

is advanced at approximately 4 frames per second for long as you hold the

shutter-release button down; low-speed continuous mode (L) will provide

up to 2 frames per second. When you operate the camera in either low- or

high-speed continuous and autofocus mode, the focus setting will be

checked and adjusted between each exposure to ensure that moving

subjects remain sharply focused.

To select the film-drive mode:

1. Open the card door.

2. Press the self-timer/drive-mode button until the indicator for the mode

you want appears in the body data panel.

-NEXT PAGE-